Daily Papers

Scaling laws for Large Language Models (LLMs) establish that model quality improves with computational scale, yet edge deployment imposes strict constraints on compute, memory, and power. Since General Matrix Multiplication (GEMM) accounts for up to 90% of inference time, efficient GEMM acceleration is critical for edge AI. The Adaptive Intelligent Engines available in the AMD Versal adaptive SoCs are well suited for this task, but existing state-of-the-art (SOTA) frameworks maximize performance through spatial scaling, distributing workloads across hundreds of cores -- an approach that fails on resource-limited edge SoCs due to physical implementation failures, bandwidth saturation, and excessive resource consumption. We propose Tempus, a Resource-Invariant Temporal GEMM framework for the AMD Versal AI Edge SoC. Rather than expanding hardware resources with matrix size, Tempus employs a fixed compute block of 16 AIE-ML cores, achieving scalability through iterative graph execution and algorithmic data tiling and replication in the Programmable Logic. High-speed cascade streaming ensures low-latency partial sum reduction at Initiation Interval (II) of 1, while a deadlock-free DATAFLOW protocol maximizes transfer-compute overlap and PLIO reuse. Evaluated on GEMM workloads, Tempus achieves 607 GOPS at 10.677 W total on-chip power. By characterizing system-level efficiency through the Platform-Aware Utility (PAU) metric, we prove that Tempus achieves a 211.2x higher prominence factor than the leading spatial SOTA (ARIES). Furthermore, the framework maintains a 0.00% utilization of URAM/DSP, yielding 22.0x core frugality, 7.1x power frugality, and a 6.3x reduction in I/O demand, establishing a sustainable, scalable foundation for edge LLM inference.

Recent advances in multimodal foundation models and agent systems have driven GUI agents from single-platform task execution toward cross-platform interaction. However, building multi-platform GUI agents remains challenging. On one hand, high-quality and executable cross-platform interaction trajectories are still scarce, and existing data often suffer from limited platform coverage. On the other hand, different platforms exhibit distinct interaction conventions, making joint or continual training prone to behavioral pattern mixing, platform-specific capability degradation, and catastrophic forgetting. To address these challenges, we construct Uni-GUI, a high-quality cross-platform GUI interaction dataset, and propose UI-MOPD, the first method that incorporates multi-teacher on-policy distillation into continual learning for GUI agents. UI-MOPD dynamically selects a platform-specific teacher according to the current environment and transfers platform-specific behavioral priors to a shared policy through platform-conditioned distillation, enabling adaptation to new platforms while preserving capabilities on existing ones. Experiments on OSWorld and MobileWorld show that UI-MOPD achieves task success rates of 38.2% and 12.0%, respectively, demonstrating its effectiveness in balancing cross-platform capability retention and new-platform adaptation. Project page: https://elispectre.github.io/UI-MOPD/.

The post-training of Vision-Language-Action (VLA) models is essential due to the diversity of simulators, robot embodiments, and task objectives. Existing compute services, whether offered as direct accelerator rental or batch-workload submission, typically allocate an exclusive set of GPU and CPU resources to a single tenant. While this paradigm maximizes client flexibility, it burdens users with infrastructure adaptation, and the fixed card-hour accounting model renders short or bursty workloads both expensive for tenants and inefficient for the service provider. To address these challenges, we present JoyNexus, a unified service for multi-tenant VLA supervised fine-tuning, reinforcement learning, and evaluation. JoyNexus decouples the Training Model Service, Inference Model Service, and Environment Service, each accessed through APIs and backed by resident shared base models with tenant-specific slots. Tenants can directly invoke high-level semantic APIs for training, rollout, and evaluation, or compose custom algorithms using lower-level APIs and their assigned endpoints. Multiple tenants submit workloads concurrently; their action modules, optimizers, rollout records, and policy versions remain isolated, and the service is scheduled by the global Training Queue and Inference Queue. To further improve multi-tenant training efficiency, JoyNexus introduces group batching for heterogeneous VLA data schemas that share a compatible model-facing prefix, enabling a single shared backbone forward pass over grouped samples. Finally, we evaluate JoyNexus through workload simulation and a group-batching pipeline in a realistic embodied scenario. Results show that, compared with isolated single-tenant execution, JoyNexus reduces aggregate GPU time and improves service utilization via cross-tenant scheduling on shared resources.

Machine learning (ML) inference platforms are tasked with balancing two competing goals: ensuring high throughput given many requests, and delivering low-latency responses to support interactive applications. Unfortunately, existing platform knobs (e.g., batch sizes) fail to ease this fundamental tension, and instead only enable users to harshly trade off one property for the other. This paper explores an alternate strategy to taming throughput-latency tradeoffs by changing the granularity at which inference is performed. We present Apparate, a system that automatically applies and manages early exits (EEs) in ML models, whereby certain inputs can exit with results at intermediate layers. To cope with the time-varying overhead and accuracy challenges that EEs bring, Apparate repurposes exits to provide continual feedback that powers several novel runtime monitoring and adaptation strategies. Apparate lowers median response latencies by 40.5--91.5% and 10.0--24.2% for diverse CV and NLP classification workloads, and median time-per-token latencies by 22.6--77.9% for generative scenarios, without affecting throughputs or violating tight accuracy constraints.

The automatic generation of deep learning (DL) kernels using large language models (LLMs) has emerged as a promising approach to reduce the manual effort and hardware-specific expertise required for writing high-performance operator implementations. However, existing benchmarks for evaluating LLMs in this domain suffer from limited hardware support, coarse-grained kernel categorization, and imbalanced task coverage. To address these limitations, we introduce MultiKernelBench, the first comprehensive, multi-platform benchmark for LLM-based DL kernel generation. MultiKernelBench spans 285 tasks across 14 well-defined kernel categories and supports three major hardware platforms: Nvidia GPUs, Huawei NPUs, and Google TPUs. To enable future extensibility, we design a modular backend abstraction layer that decouples platform-specific logic from the core benchmarking infrastructure, allowing easy integration of new hardware platforms. We further propose a simple yet effective category-aware one-shot prompting method that improves generation quality by providing in-category exemplars. Through systematic evaluations of seven state-of-the-art LLMs, we reveal significant variation in task difficulty, poor generalization to platforms with less training exposure, and the effectiveness of targeted prompting strategies. MultiKernelBench is publicly available at https://github.com/wzzll123/MultiKernelBench.

With the advent of specialized hardware such as Graphics Processing Units (GPUs), large scale image localization, classification and retrieval have seen increased prevalence. Designing scalable software architecture that co-evolves with such specialized hardware is a challenge in the commercial setting. In this paper, we describe one such architecture (Cortexica) that leverages scalability of GPUs and sandboxing offered by docker containers. This allows for the flexibility of mixing different computer architectures as well as computational algorithms with the security of a trusted environment. We illustrate the utility of this framework in a commercial setting i.e., searching for multiple products in an image by combining image localisation and retrieval.

Congestion is a common failure mode of markets, where consumers compete inefficiently on the same subset of goods (e.g., chasing the same small set of properties on a vacation rental platform). The typical economic story is that prices decongest by balancing supply and demand. But in modern online marketplaces, prices are typically set in a decentralized way by sellers, and the information about items is inevitably partial. The power of a platform is limited to controlling representations -- the subset of information about items presented by default to users. This motivates the present study of decongestion by representation, where a platform seeks to learn representations that reduce congestion and thus improve social welfare. The technical challenge is twofold: relying only on revealed preferences from the choices of consumers, rather than true preferences; and the combinatorial problem associated with representations that determine the features to reveal in the default view. We tackle both challenges by proposing a differentiable proxy of welfare that can be trained end-to-end on consumer choice data. We develop sufficient conditions for when decongestion promotes welfare, and present the results of extensive experiments on both synthetic and real data that demonstrate the utility of our approach.

Tree-based speculative decoding accelerates autoregressive generation by verifying a branching tree of draft tokens in a single target-model forward pass. However, existing methods prioritize maximizing token-level likelihood or the number of accepted tokens while ignoring a critical ``efficiency paradox'': the computational overhead of drafting and verifying big trees can grow super-linearly, particularly at scale. This often leads to negative wall-clock speedup when batch sizes increase or hardware saturation limits are reached. To address this, we propose SMART, a system-aware marginal analysis framework for runtime tree construction. SMART reformulates tree expansion as a hardware-aware optimization problem that directly maximizes end-to-end speedup. By applying a principled marginal benefit--cost rule at inference time, SMART expands a node only when its marginal benefit--cost ratio exceeds the tree-level speedup. SMART is training-free and serves as a plug-and-play controller for existing frameworks like MSD and EAGLE. Extensive evaluations across three MLLMs (e.g., LLaVA, Qwen2-VL) and four LLMs (e.g., Llama-3.1, DeepSeek-R1) demonstrate that SMART consistently outperforms state-of-the-art baselines. It delivers an average additional speedup of 20.0\% for MLLMs and 15.4\% for LLMs across compute-bound batching regimes and diverse GPU architectures without performance loss.

The emergence of long-context language models with context windows extending to millions of tokens has created new opportunities for sophisticated code understanding and software development evaluation. We propose LoCoBench, a comprehensive benchmark specifically designed to evaluate long-context LLMs in realistic, complex software development scenarios. Unlike existing code evaluation benchmarks that focus on single-function completion or short-context tasks, LoCoBench addresses the critical evaluation gap for long-context capabilities that require understanding entire codebases, reasoning across multiple files, and maintaining architectural consistency across large-scale software systems. Our benchmark provides 8,000 evaluation scenarios systematically generated across 10 programming languages, with context lengths spanning 10K to 1M tokens, a 100x variation that enables precise assessment of long-context performance degradation in realistic software development settings. LoCoBench introduces 8 task categories that capture essential long-context capabilities: architectural understanding, cross-file refactoring, multi-session development, bug investigation, feature implementation, code comprehension, integration testing, and security analysis. Through a 5-phase pipeline, we create diverse, high-quality scenarios that challenge LLMs to reason about complex codebases at unprecedented scale. We introduce a comprehensive evaluation framework with 17 metrics across 4 dimensions, including 8 new evaluation metrics, combined in a LoCoBench Score (LCBS). Our evaluation of state-of-the-art long-context models reveals substantial performance gaps, demonstrating that long-context understanding in complex software development represents a significant unsolved challenge that demands more attention. LoCoBench is released at: https://github.com/SalesforceAIResearch/LoCoBench.

Modern machine learning (ML) has grown into a tightly coupled, full-stack ecosystem that combines hardware, software, network, and applications. Many users rely on cloud providers for elastic, isolated, and cost-efficient resources. Unfortunately, these platforms as a service use virtualization, which means operators have little insight into the users' workloads. This hinders resource optimizations by the operator, which is essential to ensure cost efficiency and minimize execution time. In this paper, we argue that workload knowledge is unnecessary for system-level optimization. We propose Reveal, which takes a hardware-centric approach, relying only on hardware signals - fully accessible by operators. Using low-level signals collected from the system, Reveal detects anomalies through an unsupervised learning pipeline. The pipeline is developed by analyzing over 30 popular ML models on various hardware platforms, ensuring adaptability to emerging workloads and unknown deployment patterns. Using Reveal, we successfully identified both network and system configuration issues, accelerating the DeepSeek model by 5.97%.

Graphical User Interface (GUI) agents show great potential for enabling foundation models to complete real-world tasks, revolutionizing human-computer interaction and improving human productivity. In this report, we present OmegaUse, a general-purpose GUI agent model for autonomous task execution on both mobile and desktop platforms, supporting computer-use and phone-use scenarios. Building an effective GUI agent model relies on two factors: (1) high-quality data and (2) effective training methods. To address these, we introduce a carefully engineered data-construction pipeline and a decoupled training paradigm. For data construction, we leverage rigorously curated open-source datasets and introduce a novel automated synthesis framework that integrates bottom-up autonomous exploration with top-down taxonomy-guided generation to create high-fidelity synthetic data. For training, to better leverage these data, we adopt a two-stage strategy: Supervised Fine-Tuning (SFT) to establish fundamental interaction syntax, followed by Group Relative Policy Optimization (GRPO) to improve spatial grounding and sequential planning. To balance computational efficiency with agentic reasoning capacity, OmegaUse is built on a Mixture-of-Experts (MoE) backbone. To evaluate cross-terminal capabilities in an offline setting, we introduce OS-Nav, a benchmark suite spanning multiple operating systems: ChiM-Nav, targeting Chinese Android mobile environments, and Ubu-Nav, focusing on routine desktop interactions on Ubuntu. Extensive experiments show that OmegaUse is highly competitive across established GUI benchmarks, achieving a state-of-the-art (SOTA) score of 96.3% on ScreenSpot-V2 and a leading 79.1% step success rate on AndroidControl. OmegaUse also performs strongly on OS-Nav, reaching 74.24% step success on ChiM-Nav and 55.9% average success on Ubu-Nav.

AI agents are driving a new software paradigm, with the ability to autonomously call tools, extract information, manage memory, and complete tasks that span applications and data sources. Most existing end-user operating systems, however, are designed for application-centric workflows and offer little native support for AI agents. This mismatch limits the wider adoption of agents and leads to execution overhead and safety risks when running agents on conventional systems. While the concept of agent-native operating systems is emerging, the research community lacks an open testbed to explore the architectural primitives desired for agent-mediated interaction. We present AOHP (Android Open Harness Project), an OS-level agent harness built on the Android Open Source Project (AOSP). The core design principle of AOHP is to treat agents as first-class OS actors, enabling adaptive user interfaces and agent-friendly runtime environments. AOHP preserves the mature Android software and hardware ecosystem while introducing three agent-oriented system mechanisms: personalized service composition, efficient agent interfaces, and secure information flow. Based on preliminary experiments on challenging tasks covering key capabilities of OS agents, AOHP shows clear advantages in task completion (+21.12% completion rate), execution cost (-51.55% token cost), and security-policy compliance.

Large language models (LLMs) are increasingly integrated into many online services. However, a major challenge in deploying LLMs is their high cost, due primarily to the use of expensive GPU instances. To address this problem, we find that the significant heterogeneity of GPU types presents an opportunity to increase GPU cost efficiency and reduce deployment costs. The broad and growing market of GPUs creates a diverse option space with varying costs and hardware specifications. Within this space, we show that there is not a linear relationship between GPU cost and performance, and identify three key LLM service characteristics that significantly affect which GPU type is the most cost effective: model request size, request rate, and latency service-level objective (SLO). We then present M\'elange, a framework for navigating the diversity of GPUs and LLM service specifications to derive the most cost-efficient set of GPUs for a given LLM service. We frame the task of GPU selection as a cost-aware bin-packing problem, where GPUs are bins with a capacity and cost, and items are request slices defined by a request size and rate. Upon solution, M\'elange derives the minimal-cost GPU allocation that adheres to a configurable latency SLO. Our evaluations across both real-world and synthetic datasets demonstrate that M\'elange can reduce deployment costs by up to 77% as compared to utilizing only a single GPU type, highlighting the importance of making heterogeneity-aware GPU provisioning decisions for LLM serving. Our source code is publicly available at https://github.com/tyler-griggs/melange-release.

Computer-use agents (CUAs) operate graphical user interfaces (GUIs) through vision and control primitives, and their capabilities have advanced rapidly, driven in part by standardized online evaluation benchmarks such as OSWorld, which serve both as evaluation tools and as training environments for reinforcement learning. However, macOS remains underserved in this landscape: the only existing benchmark, macOSWorld, covers a narrow slice of first-party applications with simpler tasks, and runs on x86 virtual machines incompatible with Apple Silicon. We introduce MacArena, a benchmark of 421 manually verified tasks spanning 50 applications that combines a curated port of OSWorld tasks, content sourced from macOSWorld, and 49 new macOS-native tasks, all running on Apple's native Virtualization framework on Apple Silicon. We argue that macOS presents distinct GUI challenges beyond what Linux-based benchmarks capture, and our evaluation supports this claim: strong model performance on existing benchmarks can reflect familiarity with task distributions rather than genuine cross-platform GUI competence. Notably, model rankings invert between ported and macOS-native tasks, with a leading model trailing by over 26% on the MacArena subset, suggesting that macOS poses a genuinely harder environment for current GUI agents.

The deployment of Large Language Models (LLMs) and Large Multimodal Models (LMMs) on mobile devices has gained significant attention due to the benefits of enhanced privacy, stability, and personalization. However, the hardware constraints of mobile devices necessitate the use of models with fewer parameters and model compression techniques like quantization. Currently, there is limited understanding of quantization's impact on various task performances, including LLM tasks, LMM tasks, and, critically, trust and safety. There is a lack of adequate tools for systematically testing these models on mobile devices. To address these gaps, we introduce MobileAIBench, a comprehensive benchmarking framework for evaluating mobile-optimized LLMs and LMMs. MobileAIBench assesses models across different sizes, quantization levels, and tasks, measuring latency and resource consumption on real devices. Our two-part open-source framework includes a library for running evaluations on desktops and an iOS app for on-device latency and hardware utilization measurements. Our thorough analysis aims to accelerate mobile AI research and deployment by providing insights into the performance and feasibility of deploying LLMs and LMMs on mobile platforms.

Large language models (LLMs) are increasingly asked not only to write static interfaces, but to construct executable interactive worlds from natural language. Browser-native 3D, commonly built with Three.js, is a natural next frontier: generated programs must integrate assets, obey spatial and physical constraints, and keep user-facing controls synchronized with hidden runtime state. Existing web-generation benchmarks and evaluators, however, largely observe only pixels or DOM nodes, while the mechanics of a Three.js world unfold inside an opaque <canvas>. We introduce WorldCoder-Bench, a benchmark for autonomous, physically grounded 3D world synthesis. WorldCoder-Bench contains 2,026 expert-curated tasks across Simulation, Rendering, and Application scenarios, with optional .glb assets and hidden behavioral contracts. We further propose StateProbe, an execution-based protocol that probes generated programs in a sandboxed browser and verifies hidden, mutation-hardened contracts over runtime states and transitions. Beyond verification coverage, we report Return on Automation and Time Efficiency Multiplier to measure correctness-adjusted cost and time savings. Across nine frontier models, the best system reaches only 27.8% verification coverage on WorldCoder-Core and 19.9% on WorldCoder-Robust, with failures dominated by state-schema drift and broken interaction chains rather than missing scene elements. Utility metrics further show that cheap or fast models can still provide substantial value on easier domains. WorldCoder-Bench is available at https://anonymous.4open.science/r/WorldCoder-Bench/.

The Model Context Protocol (MCP) has recently emerged as a standardized interface for connecting language models with external tools and data. As the ecosystem rapidly expands, the lack of a structured, comprehensive view of existing MCP artifacts presents challenges for research. To bridge this gap, we introduce MCPCorpus, a large-scale dataset containing around 14K MCP servers and 300 MCP clients. Each artifact is annotated with 20+ normalized attributes capturing its identity, interface configuration, GitHub activity, and metadata. MCPCorpus provides a reproducible snapshot of the real-world MCP ecosystem, enabling studies of adoption trends, ecosystem health, and implementation diversity. To keep pace with the rapid evolution of the MCP ecosystem, we provide utility tools for automated data synchronization, normalization, and inspection. Furthermore, to support efficient exploration and exploitation, we release a lightweight web-based search interface. MCPCorpus is publicly available at: https://github.com/Snakinya/MCPCorpus.

Parameter-efficient fine-tuning (PEFT) is usually treated as a cheaper alternative to full fine-tuning. We study a broader role: small trainable adapters as persistent local state on top of strong shared foundation models. In this framing, the base model provides shared competence while adapters carry instance-specific behavior such as preferences, skills, tool habits, and memory-like updates. We organize the problem around three scaling axes: Scale Up, where stronger shared priors make small local updates more useful; Scale Down, where we study how small adapters can be while remaining reliable; and Scale Out, where many persistent adapted instances coexist. MinT provides one infrastructure example for managing adapter identity, revision, provenance, evaluation, and serving residency. Together, the results suggest that PEFT can be a compact substrate for persistent personal models rather than only a budget substitute for full fine-tuning.

Existing efforts in building GUI agents heavily rely on the availability of robust commercial Vision-Language Models (VLMs) such as GPT-4o and GeminiProVision. Practitioners are often reluctant to use open-source VLMs due to their significant performance lag compared to their closed-source counterparts, particularly in GUI grounding and Out-Of-Distribution (OOD) scenarios. To facilitate future research in this area, we developed OS-Atlas - a foundational GUI action model that excels at GUI grounding and OOD agentic tasks through innovations in both data and modeling. We have invested significant engineering effort in developing an open-source toolkit for synthesizing GUI grounding data across multiple platforms, including Windows, Linux, MacOS, Android, and the web. Leveraging this toolkit, we are releasing the largest open-source cross-platform GUI grounding corpus to date, which contains over 13 million GUI elements. This dataset, combined with innovations in model training, provides a solid foundation for OS-Atlas to understand GUI screenshots and generalize to unseen interfaces. Through extensive evaluation across six benchmarks spanning three different platforms (mobile, desktop, and web), OS-Atlas demonstrates significant performance improvements over previous state-of-the-art models. Our evaluation also uncovers valuable insights into continuously improving and scaling the agentic capabilities of open-source VLMs.

The demand for machine intelligence capable of processing continuous, long-context inputs on local devices is growing rapidly. However, the quadratic complexity and memory requirements of traditional Transformer architectures make them inefficient and often unusable for these tasks. This has spurred a paradigm shift towards new architectures like State Space Models (SSMs) and hybrids, which promise near-linear scaling. While most current research focuses on the accuracy and theoretical throughput of these models, a systematic performance characterization on practical consumer hardware is critically needed to guide system-level optimization and unlock new applications. To address this gap, we present a comprehensive, comparative benchmarking of carefully selected Transformer, SSM, and hybrid models specifically for long-context inference on consumer and embedded GPUs. Our analysis reveals that SSMs are not only viable but superior for this domain, capable of processing sequences up to 220K tokens on a 24GB consumer GPU-approximately 4x longer than comparable Transformers. While Transformers may be up to 1.8x faster at short sequences, SSMs demonstrate a dramatic performance inversion, becoming up to 4x faster at very long contexts (~57K tokens). Our operator-level analysis reveals that custom, hardware-aware SSM kernels dominate the inference runtime, accounting for over 55% of latency on edge platforms, identifying them as a primary target for future hardware acceleration. We also provide detailed, device-specific characterization results to guide system co-design for the edge. To foster further research, we will open-source our characterization framework.

Large language models (LLMs) have shown remarkable performance across a wide range of applications, often outperforming human experts. However, deploying these parameter-heavy models efficiently for diverse inference use cases requires carefully designed hardware platforms with ample computing, memory, and network resources. With LLM deployment scenarios and models evolving at breakneck speed, the hardware requirements to meet SLOs remains an open research question. In this work, we present an analytical tool, GenZ, to study the relationship between LLM inference performance and various platform design parameters. Our analysis provides insights into configuring platforms for different LLM workloads and use cases. We quantify the platform requirements to support SOTA LLMs models like LLaMA and GPT-4 under diverse serving settings. Furthermore, we project the hardware capabilities needed to enable future LLMs potentially exceeding hundreds of trillions of parameters. The trends and insights derived from GenZ can guide AI engineers deploying LLMs as well as computer architects designing next-generation hardware accelerators and platforms. Ultimately, this work sheds light on the platform design considerations for unlocking the full potential of large language models across a spectrum of applications. The source code is available at https://github.com/abhibambhaniya/GenZ-LLM-Analyzer .

Generative AI release decisions determine whether system components are made available, but release does not address many other elements that change how users and stakeholders are able to engage with a system. Beyond release, access to system components informs potential risks and benefits. Access refers to practical needs, infrastructurally, technically, and societally, in order to use available components in some way. We deconstruct access along three axes: resourcing, technical usability, and utility. Within each category, a set of variables per system component clarify tradeoffs. For example, resourcing requires access to computing infrastructure to serve model weights. We also compare the accessibility of four high performance language models, two open-weight and two closed-weight, showing similar considerations for all based instead on access variables. Access variables set the foundation for being able to scale or increase access to users; we examine the scale of access and how scale affects ability to manage and intervene on risks. This framework better encompasses the landscape and risk-benefit tradeoffs of system releases to inform system release decisions, research, and policy.

Transformers have revolutionized the machine learning landscape, gradually making their way into everyday tasks and equipping our computers with "sparks of intelligence". However, their runtime requirements have prevented them from being broadly deployed on mobile. As personal devices become increasingly powerful and prompt privacy becomes an ever more pressing issue, we explore the current state of mobile execution of Large Language Models (LLMs). To achieve this, we have created our own automation infrastructure, MELT, which supports the headless execution and benchmarking of LLMs on device, supporting different models, devices and frameworks, including Android, iOS and Nvidia Jetson devices. We evaluate popular instruction fine-tuned LLMs and leverage different frameworks to measure their end-to-end and granular performance, tracing their memory and energy requirements along the way. Our analysis is the first systematic study of on-device LLM execution, quantifying performance, energy efficiency and accuracy across various state-of-the-art models and showcases the state of on-device intelligence in the era of hyperscale models. Results highlight the performance heterogeneity across targets and corroborates that LLM inference is largely memory-bound. Quantization drastically reduces memory requirements and renders execution viable, but at a non-negligible accuracy cost. Drawing from its energy footprint and thermal behavior, the continuous execution of LLMs remains elusive, as both factors negatively affect user experience. Last, our experience shows that the ecosystem is still in its infancy, and algorithmic as well as hardware breakthroughs can significantly shift the execution cost. We expect NPU acceleration, and framework-hardware co-design to be the biggest bet towards efficient standalone execution, with the alternative of offloading tailored towards edge deployments.

Parameter-Efficient Fine-Tuning (PEFT) is widely applied as the backend of fine-tuning APIs for large language model (LLM) customization in datacenters. Service providers deploy separate instances for individual PEFT tasks, giving rise to prominent resource inefficiencies, including (1) GPU underutilization from small-scale, PEFT-native operators and (2) device stalls from communication delays and data dependencies in parallelized execution. To address these issues, this paper presents MuxTune, a fine-tuning system that enables resource-efficient concurrent execution of multiple PEFT tasks. The key idea is to multiplex the backbone across independent tasks in a spatial-temporal manner for improved utilization and reduced stalls. Building on flexible, modularized backbone sharing via unified PEFT representations, MuxTune proposes hierarchical co-scheduling scheme with task, operator, and data-level optimizations. Specifically, it fuses tasks through a hybrid of spatial and temporal multiplexing, and orchestrates multi-task operator execution in two-tiered hybrid parallelism. Additionally, MuxTune employs chunk-based data alignment to mitigate inter-task ineffective tokens. Experimental results demonstrate that MuxTune achieves up to 2.33times higher throughput and 5.29times memory reduction compared to three state-of-the-art baselines.

We introduce MMBench-GUI, a hierarchical benchmark for evaluating GUI automation agents across Windows, macOS, Linux, iOS, Android, and Web platforms. It comprises four levels: GUI Content Understanding, Element Grounding, Task Automation, and Task Collaboration, covering essential skills for GUI agents. In addition, we propose a novel Efficiency-Quality Area (EQA) metric to assess GUI agent execution efficiency in online automation scenarios. Through MMBench-GUI, we identify accurate visual grounding as a critical determinant of overall task success, emphasizing the substantial benefits of modular frameworks that integrate specialized grounding modules. Furthermore, to achieve reliable GUI automation, an agent requires strong task planning and cross-platform generalization abilities, with long-context memory, a broad action space, and long-term reasoning playing a critical role. More important, task efficiency remains a critically underexplored dimension, and all models suffer from substantial inefficiencies, with excessive redundant steps even when tasks are ultimately completed. The integration of precise localization, effective planning, and early stopping strategies is indispensable to enable truly efficient and scalable GUI automation. Our benchmark code, evaluation data, and running environment will be publicly available at https://github.com/open-compass/MMBench-GUI.

Transformers are ubiquitous in Natural Language Processing (NLP) tasks, but they are difficult to be deployed on hardware due to the intensive computation. To enable low-latency inference on resource-constrained hardware platforms, we propose to design Hardware-Aware Transformers (HAT) with neural architecture search. We first construct a large design space with arbitrary encoder-decoder attention and heterogeneous layers. Then we train a SuperTransformer that covers all candidates in the design space, and efficiently produces many SubTransformers with weight sharing. Finally, we perform an evolutionary search with a hardware latency constraint to find a specialized SubTransformer dedicated to run fast on the target hardware. Extensive experiments on four machine translation tasks demonstrate that HAT can discover efficient models for different hardware (CPU, GPU, IoT device). When running WMT'14 translation task on Raspberry Pi-4, HAT can achieve 3times speedup, 3.7times smaller size over baseline Transformer; 2.7times speedup, 3.6times smaller size over Evolved Transformer with 12,041times less search cost and no performance loss. HAT code is https://github.com/mit-han-lab/hardware-aware-transformers.git

The recent shift in Generative AI (GenAI) applications from cloud-only environments to end-user devices introduces new challenges in resource management, system efficiency, and user experience. This paper presents ConsumerBench, a comprehensive benchmarking framework designed to evaluate the system efficiency and response time of GenAI models running on end-user devices. Unlike existing benchmarks that assume exclusive model access on dedicated GPUs, ConsumerBench simulates realistic multi-application scenarios executing concurrently on constrained hardware. Furthermore, ConsumerBench supports customizable workflows that simulate complex tasks requiring coordination among multiple applications. ConsumerBench captures both application-level metrics, including latency and Service Level Objective (SLO) attainment, and system-level metrics like CPU/GPU utilization and memory bandwidth. Through extensive experiments, ConsumerBench reveals inefficiencies in resource sharing, unfair scheduling under greedy allocation, and performance pitfalls of static model server configurations. The paper also provides practical insights for model developers and system designers, highlighting the benefits of custom kernels tailored to consumer-grade GPU architectures and the value of implementing SLO-aware scheduling strategies.

OpenClaw has emerged as a leading agent framework for complex task automation, yet it faces insufficient cross-platform GUI interaction support and a well-built self-evolution mechanism. These flaws limit its adaptation to diverse device ecosystems and prevent performance improvements through continuous learning from execution experience. To resolve these issues, we propose the Know Deeply, Act Perfectly paradigm for personal assistants, which holds that accumulated user interaction and task-running experience directly improve execution accuracy and efficiency, unifying cognitive comprehension and operational execution. Based on this paradigm, we introduce KnowAct-GUIClaw, a novel Know-Route-Act-Reflect framework designed to address OpenClaw's GUI manipulation deficits and break through its cross-platform and recursive self-improvement constraints. First, the host agent leverages accumulated interaction experience and task-relevant knowledge for long-horizon task decomposition and allocation (Know). Second, a pluggable GUI subagent with an experience-attributable memory system (Know) and self-evolving skill library (Act), enabling seamless cross-platform migration and fast-path integration. Especially, this framework continuously stores user profiles and feedback to improve the accuracy of task decomposition and tool calls. Extensive experiments across Android, iOS, HarmonyOS and Windows show that KnowAct-GUIClaw achieves superior efficiency, accuracy and cross-platform adaptability. Especially, the GUIClaw with open-source Kimi-2.6 models achieves the best performance (64.1%) on the long-horizon MobileWorld benchmark, beating all agentical frameworks and closed-source agentical models, e.g., Seed-2.0-Pro and GPT-5.5. Additionally, the knowledgeable memory and execution skills supported by our framework are transferable across diverse base models, improving by 8.5% with Kimi-2.6.

ModeSwitch-LLM is a lightweight request-boundary controller for improving single-GPU large language model inference efficiency by routing each request to an appropriate fixed inference mode. Instead of relying on one static serving configuration, the system selects among FP16, quantized modes, speculative decoding, and hybrid modes such as GPTQ plus prefix caching and INT8 plus continuous batching using cheap workload-level features. We evaluate ModeSwitch-LLM on Meta-Llama-3.1-8B-Instruct served on a single NVIDIA A100 GPU. On deployment-style synthetic workloads, the online controller achieves a 2.10x mean latency speedup over FP16 and a 0.48x mean energy ratio, corresponding to 51.7% lower energy per token. On automatic benchmarks used as a quality gate, accuracy remains close to FP16 with a mean delta of +0.17 percentage points. We also evaluate lightweight learned routers, but find that they do not clearly outperform the rule-based controller because they add routing overhead and more often select modes that violate quality, energy, or memory constraints. These results show that simple request-aware routing can recover substantial efficiency from existing inference modes without retraining the model or changing its architecture.

Deep learning research for binary analysis faces a critical infrastructure gap. Today, existing datasets target single platforms, require specialized tooling, or provide only hand-engineered features incompatible with modern neural architectures; no single dataset supports accessible research and pedagogy on realistic use cases. To solve this, we introduce Binary-30K, the first heterogeneous binary dataset designed for sequence-based models like transformers. Critically, Binary-30K covers Windows, Linux, macOS, and Android across 15+ CPU architectures. With 29,793 binaries and approximately 26.93% malware representation, Binary-30K enables research on platform-invariant detection, cross-target transfer learning, and long-context binary understanding. The dataset provides pre-computed byte-level BPE tokenization alongside comprehensive structural metadata, supporting both sequence modeling and structure-aware approaches. Platform-first stratified sampling ensures representative coverage across operating systems and architectures, while distribution via Hugging Face with official train/validation/test splits enables reproducible benchmarking. The dataset is publicly available at https://huggingface.co/datasets/mjbommar/binary-30k, providing an accessible resource for researchers, practitioners, and students alike.

On the way to Exascale, programmers face the increasing challenge of having to support multiple hardware architectures from the same code base. At the same time, portability of code and performance are increasingly difficult to achieve as hardware architectures are becoming more and more diverse. Today's heterogeneous systems often include two or more completely distinct and incompatible hardware execution models, such as GPGPU's, SIMD vector units, and general purpose cores which conventionally have to be programmed using separate tool chains representing non-overlapping programming models. The recent revival of interest in the industry and the wider community for the C++ language has spurred a remarkable amount of standardization proposals and technical specifications in the arena of concurrency and parallelism. This recently includes an increasing amount of discussion around the need for a uniform, higher-level abstraction and programming model for parallelism in the C++ standard targeting heterogeneous and distributed computing. Such an abstraction should perfectly blend with existing, already standardized language and library features, but should also be generic enough to support future hardware developments. In this paper, we present the results from developing such a higher-level programming abstraction for parallelism in C++ which aims at enabling code and performance portability over a wide range of architectures and for various types of parallelism. We present and compare performance data obtained from running the well-known STREAM benchmark ported to our higher level C++ abstraction with the corresponding results from running it natively. We show that our abstractions enable performance at least as good as the comparable base-line benchmarks while providing a uniform programming API on all compared target architectures.

User interface to code (UI2Code) aims to generate executable code that can faithfully reconstruct a given input UI. Prior work focuses largely on web pages and mobile screens, leaving app widgets underexplored. Unlike web or mobile UIs with rich hierarchical context, widgets are compact, context-free micro-interfaces that summarize key information through dense layouts and iconography under strict spatial constraints. Moreover, while (image, code) pairs are widely available for web or mobile UIs, widget designs are proprietary and lack accessible markup. We formalize this setting as the Widget-to-Code (Widget2Code) and introduce an image-only widget benchmark with fine-grained, multi-dimensional evaluation metrics. Benchmarking shows that although generalized multimodal large language models (MLLMs) outperform specialized UI2Code methods, they still produce unreliable and visually inconsistent code. To address these limitations, we develop a baseline that jointly advances perceptual understanding and structured code generation. At the perceptual level, we follow widget design principles to assemble atomic components into complete layouts, equipped with icon retrieval and reusable visualization modules. At the system level, we design an end-to-end infrastructure, WidgetFactory, which includes a framework-agnostic widget-tailored domain-specific language (WidgetDSL) and a compiler that translates it into multiple front-end implementations (e.g., React, HTML/CSS). An adaptive rendering module further refines spatial dimensions to satisfy compactness constraints. Together, these contributions substantially enhance visual fidelity, establishing a strong baseline and unified infrastructure for future Widget2Code research.

Large language model (LLM)-powered agents are transforming digital devices from passive tools into proactive intelligent collaborators. However, most existing frameworks remain confined to a single OS or device, making cross-device workflows brittle and largely manual. We present UFO^3, a system that unifies heterogeneous endpoints, desktops, servers, mobile devices, and edge, into a single orchestration fabric. UFO^3 models each user request as a mutable TaskConstellation: a distributed DAG of atomic subtasks (TaskStars) with explicit control and data dependencies (TaskStarLines). The TaskConstellation continuously evolves as results stream in from distributed devices, enabling asynchronous execution, adaptive recovery, and dynamic optimization. A Constellation Orchestrator} executes tasks safely and asynchronously while applying dynamic DAG updates, and the Agent Interaction Protocol (AIP) provides persistent, low-latency channels for reliable task dispatch and result streaming. These designs dissolve the traditional boundaries between devices and platforms, allowing agents to collaborate seamlessly and amplify their collective intelligence. We evaluate UFO^3 on NebulaBench, a benchmark of 55 cross-device tasks across 5 machines and 10 categories. UFO^3 achieves 83.3% subtask completion, 70.9% task success, exposes parallelism with an average width of 1.72, and reduces end-to-end latency by 31% relative to a sequential baseline. Fault-injection experiments demonstrate graceful degradation and recovery under transient and permanent agent failures. These results show that UFO^3 achieves accurate, efficient, and resilient task orchestration across heterogeneous devices, uniting isolated agents into a coherent, adaptive computing fabric that extends across the landscape of ubiquitous computing.

Optimizing GPU kernels presents a significantly greater challenge for large language models (LLMs) than standard code generation tasks, as it requires understanding hardware architecture, parallel optimization strategies, and performance profiling outputs. Most existing LLM-based approaches to kernel generation rely on simple prompting and feedback loops, incorporating hardware awareness only indirectly through profiling feedback. We introduce KernelFoundry, an evolutionary framework that efficiently explores the GPU kernel design space through three key mechanisms: (1) MAP-Elites quality-diversity search with kernel-specific behavioral dimensions to sustain exploration across diverse optimization strategies; (2) meta-prompt evolution, which co-evolves prompts with kernels to uncover task-specific optimization strategies, and (3) template-based parameter optimization to tune kernels to inputs and hardware. We evaluate this framework on KernelBench, robust-kbench, and custom tasks, generating SYCL kernels as a cross-platform GPU programming model and CUDA kernels for comparison to prior work. Our approach consistently outperforms the baseline methods, achieving an average speedup of 2.3x on KernelBench for SYCL. Moreover, KernelFoundry is implemented as a distributed framework with remote access to diverse hardware, enabling rapid benchmarking and featuring a flexible user input layer that supports kernel generation for a wide range of real-world use cases beyond benchmarking.

The rapid expansion of capabilities in Large Language Model (LLM) agents has exposed a critical architectural bottleneck: when agents are given access to a flat, monolithic registry of tools, the model must evaluate hundreds or thousands of options simultaneously. This leads to decision-space explosion, context window saturation, and degraded routing accuracy. To address these limitations, this paper presents a hierarchical, skill-based architecture for agentic orchestration. Capabilities are organized as a rooted tree where internal nodes make routing decisions and leaf nodes execute deterministic tasks. The runtime enforces a single-step execution loop governed by a Last-In-First-Out (LIFO) stack, giving the agent a form of memory akin to a Pushdown Automaton, therefore enabling it to track nested execution contexts and resume deterministically from any depth. Capability discovery follows a manifest-driven, lazy-loading protocol: only the immediate children of the active node are loaded, so memory and prompt costs scale with the explored path rather than the global registry. By replacing global memory with localized stack frames, the architecture prevents outputs from one execution branch from leaking into another, establishing the isolation guarantees required for deployment in regulated enterprise environments. We also discuss UPI Help, an AI-powered digital payments support product, as a motivating production deployment context. We provide a mathematical formalization of the orchestration state, detailed algorithmic analysis of the execution loop, and controlled benchmarks comparing flat and hierarchical routing under increasing tool catalogs, multi-step workflow pressure, and visible schema-token exposure per LLM call.

The recent widespread adoption of Large Language Models (LLMs) and machine learning in general has sparked research interest in exploring the possibilities of deploying these models on smaller devices such as laptops and mobile phones. This creates a need for frameworks and approaches that are capable of taking advantage of on-device hardware. The MLX framework was created to address this need. It is a framework optimized for machine learning (ML) computations on Apple silicon devices, facilitating easier research, experimentation, and prototyping. This paper presents a performance evaluation of MLX, focusing on inference latency of transformer models. We compare the performance of different transformer architecture implementations in MLX with their Pytorch counterparts. For this research we create a framework called MLX-transformers which includes different transformer implementations in MLX and downloads the model checkpoints in pytorch and converts it to the MLX format. By leveraging the advanced architecture and capabilities of Apple Silicon, MLX-Transformers enables seamless execution of transformer models directly sourced from Hugging Face, eliminating the need for checkpoint conversion often required when porting models between frameworks. Our study benchmarks different transformer models on two Apple Silicon macbook devices against an NVIDIA CUDA GPU. Specifically, we compare the inference latency performance of models with the same parameter sizes and checkpoints. We evaluate the performance of BERT, RoBERTa, and XLM-RoBERTa models, with the intention of extending future work to include models of different modalities, thus providing a more comprehensive assessment of MLX's capabilities. The results highlight MLX's potential in enabling efficient and more accessible on-device ML applications within Apple's ecosystem.

Large language models are redefining software engineering by implementing AI-powered techniques throughout the whole software development process, including requirement gathering, software architecture, code generation, testing, and deployment. However, it is still difficult to develop a cohesive platform that consistently produces the best outcomes across all stages. The objective of this study is to develop a unified platform that utilizes multiple artificial intelligence agents to automate the process of transforming user requirements into well-organized deliverables. These deliverables include user stories, prioritization, and UML sequence diagrams, along with the modular approach to APIs, unit tests, and end-to-end tests. Additionally, the platform will organize tasks, perform security and compliance, and suggest design patterns and improvements for non-functional requirements. We allow users to control and manage each phase according to their preferences. In addition, the platform provides security and compliance checks following European standards and proposes design optimizations. We use multiple models, such as GPT-3.5, GPT-4, and Llama3 to enable to generation of modular code as per user choice. The research also highlights the limitations and future research discussions to overall improve the software development life cycle. The source code for our uniform platform is hosted on GitHub, enabling additional experimentation and supporting both research and practical uses. \end

Large language models (LLMs) have shown strong performance on automated software engineering tasks, yet existing benchmarks focus primarily on general-purpose libraries or web applications, leaving mobile application development largely unexplored despite its strict platform constraints, framework-driven lifecycles, and complex platform API interactions. We introduce MobileDev-Bench, a benchmark comprising 384 real-world issue-resolution tasks collected from 18 production mobile applications spanning Android Native (Java/Kotlin), React Native (TypeScript), and Flutter (Dart). Each task pairs an authentic developer-reported issue with executable test patches, enabling fully automated validation of model-generated fixes within mobile build environments. The benchmark exhibits substantial patch complexity: fixes modify 12.5 files and 324.9 lines on average, and 35.7% of instances require coordinated changes across multiple artifact types, such as source and manifest files. Evaluation of four state-of-the-art code-capable LLMs, GPT- 5.2, Claude Sonnet 4.5, Gemini Flash 2.5, and Qwen3-Coder, yields low end-to-end resolution rates of 3.39%-5.21%, revealing significant performance gaps compared to prior benchmarks. Further analysis reveals systematic failure modes, with fault localization across multi-file and multi-artifact changes emerging as the primary bottleneck.

For deployment, neural architecture search should be hardware-aware, in order to satisfy the device-specific constraints (e.g., memory usage, latency and energy consumption) and enhance the model efficiency. Existing methods on hardware-aware NAS collect a large number of samples (e.g., accuracy and latency) from a target device, either builds a lookup table or a latency estimator. However, such approach is impractical in real-world scenarios as there exist numerous devices with different hardware specifications, and collecting samples from such a large number of devices will require prohibitive computational and monetary cost. To overcome such limitations, we propose Hardware-adaptive Efficient Latency Predictor (HELP), which formulates the device-specific latency estimation problem as a meta-learning problem, such that we can estimate the latency of a model's performance for a given task on an unseen device with a few samples. To this end, we introduce novel hardware embeddings to embed any devices considering them as black-box functions that output latencies, and meta-learn the hardware-adaptive latency predictor in a device-dependent manner, using the hardware embeddings. We validate the proposed HELP for its latency estimation performance on unseen platforms, on which it achieves high estimation performance with as few as 10 measurement samples, outperforming all relevant baselines. We also validate end-to-end NAS frameworks using HELP against ones without it, and show that it largely reduces the total time cost of the base NAS method, in latency-constrained settings. Code is available at https://github.com/HayeonLee/HELP.

LLM-Agents have evolved into autonomous systems for complex task execution, with the SKILL.md specification emerging as a de facto standard for encapsulating agent capabilities. However, a critical bottleneck remains: different agent frameworks exhibit starkly different sensitivities to prompt formatting, causing up to 40% performance variation, yet nearly all skills exist as a single, format-agnostic Markdown version. Manual per-platform rewriting creates an unsustainable maintenance burden, while prior audits have found that over one third of community skills contain security vulnerabilities. To address this, we present SkCC, a compilation framework that introduces classical compiler design into agent skill development. At its core, SkIR - a strongly-typed intermediate representation - decouples skill semantics from platform-specific formatting, enabling portable deployment across heterogeneous agent frameworks. Around this IR, a compile-time Analyzer enforces security constraints via Anti-Skill Injection before deployment. Through a four-phase pipeline, SkCC reduces adaptation complexity from O(m times n) to O(m + n). Experiments on SkillsBench demonstrate that compiled skills consistently outperform their original counterparts, improving pass rates from 21.1% to 33.3% on Claude Code and from 35.1% to 48.7% on Kimi CLI, while achieving sub-10ms compilation latency, a 94.8% proactive security trigger rate, and 10-46% runtime token savings across platforms.

Huawei's openPangu-Embedded-1B and openPangu-Embedded-7B are variants of the openPangu large language model, designed for efficient deployment on Ascend NPUs. The 7B variant supports three distinct Chain-of-Thought (CoT) reasoning paradigms, namely slow_think, auto_think, and no_think, while the 1B variant operates exclusively in the no_think mode, which employs condensed reasoning for higher efficiency. Although CoT reasoning enhances capability, the generation of extended reasoning traces introduces substantial memory and latency overheads, posing challenges for practical deployment on Ascend NPUs. This paper addresses these computational constraints by leveraging low-bit quantization, which transforms FP16 computations into more efficient integer arithmetic. We introduce a unified low-bit inference framework, supporting INT8 (W8A8) and W4A8 quantization, specifically optimized for openPangu-Embedded models on the Atlas A2. Our comprehensive evaluation on code generation benchmarks (HumanEval and MBPP) demonstrates the efficacy of this approach. INT8 quantization consistently preserves over 90\% of the FP16 baseline accuracy and achieves a 1.5x prefill speedup on the Atlas A2. Furthermore, W4A8 quantization significantly reduces memory consumption, albeit with a moderate trade-off in accuracy. These findings collectively indicate that low-bit quantization effectively facilitates efficient CoT reasoning on Ascend NPUs, maintaining high model fidelity.

Computer-use agents (CUAs) increasingly operate in runtimes that combine visual desktop control, command-line execution, code editing, browsers, and external tools. Existing benchmarks, however, often evaluate these interfaces as separable capabilities, leaving long-horizon cross-interface orchestration under-tested. Thus, we introduce WeaveBench, a long-horizon hybrid-interface benchmark with 114 tasks across 8 real-world work domains, grounded in real user requests and publicly verifiable artifacts. Each task requires agents to combine GUI observations/actions with CLI/code operations within a single trajectory. We evaluate these tasks on a real Ubuntu desktop inside deployed CLI-agent runtimes, augmented with a minimal desktop-control plugin. We also propose a companion trajectory-aware judge that inspects deliverables, files, screenshots, logs, and action traces, while detecting shortcut behaviors such as fabricated visual evidence or hard-coded metrics. Across frontier model-runtime pairings, the best PassRate reaches only 41.2%, showing the benchmark remains far from saturated. The trajectory-aware judge further reveals that outcome-only grading substantially overestimates agent performance. Overall, WeaveBench exposes a critical gap in CUA evaluation and provides an effective testbed to measure whether agents can orchestrate GUI, CLI, and code operations across long-horizon real-world tasks.

Pharo offers a sophisticated completion engine based on semantic heuristics, which coordinates specific fetchers within a lazy architecture. These heuristics can be recomposed to support various activities (e.g., live programming or history usage navigation). While this system is powerful, it does not account for the repository structure when suggesting global names such as class names, class variables, or global variables. As a result, it does not prioritize classes within the same package or project, treating all global names equally. In this paper, we present a new heuristic that addresses this limitation. Our approach searches variable names in a structured manner: it begins with the package of the requesting class, then expands to other packages within the same repository, and finally considers the global namespace. We describe the logic behind this heuristic and evaluate it against the default semantic heuristic and one that directly queries the global namespace. Preliminary results indicate that the Mean Reciprocal Rank (MRR) improves, confirming that package-awareness completions deliver more accurate and relevant suggestions than the previous flat global approach.

With the deep integration of artificial intelligence and interactive technology, Graphical User Interface (GUI) Agent, as the carrier connecting goal-oriented natural language and real-world devices, has received widespread attention from the community. Contemporary benchmarks aim to evaluate the comprehensive capabilities of GUI agents in GUI operation tasks, generally determining task completion solely by inspecting the final screen state. However, GUI operation tasks consist of multiple chained steps while not all critical information is presented in the final few pages. Although a few research has begun to incorporate intermediate steps into evaluation, accurately and automatically capturing this process information still remains an open challenge. To address this weakness, we introduce ProBench, a comprehensive mobile benchmark with over 200 challenging GUI tasks covering widely-used scenarios. Remaining the traditional State-related Task evaluation, we extend our dataset to include Process-related Task and design a specialized evaluation method. A newly introduced Process Provider automatically supplies accurate process information, enabling presice assessment of agent's performance. Our evaluation of advanced GUI agents reveals significant limitations for real-world GUI scenarios. These shortcomings are prevalent across diverse models, including both large-scale generalist models and smaller, GUI-specific models. A detailed error analysis further exposes several universal problems, outlining concrete directions for future improvements.

The emergence of Deep Neural Network (DNN) and machine learning-based applications paved the way for a new generation of hybrid hardware platforms. Hybrid platforms embed several cores and accelerators in a small package. However, in order to satisfy the Size, Weight and Power (SWaP) constraints, limited and shared resources are integrated. This paper presents an overview of the standards applicable to the certification of hybrid platforms and an early mapping of their objectives to said platforms. In particular, we consider how the classification of AMC20-152A for airborne electronic hardware applies to hybrid platforms. We also consider AMC20-193 for multi-core platforms, and how this standard fits different types of accelerators.

Cloud platforms are increasingly relied upon to host diverse, resource-intensive workloads due to their scalability, flexibility, and cost-efficiency. In multi-tenant cloud environments, virtual machines are consolidated on shared physical servers to improve resource utilization. While virtualization guarantees resource partitioning for CPU, memory, and storage, it cannot ensure performance isolation. Competition for shared resources such as last-level cache, memory bandwidth, and network interfaces often leads to severe performance degradation. Existing management techniques, including VM scheduling and resource provisioning, require accurate performance prediction to mitigate interference. However, this remains challenging in public clouds due to the black-box nature of VMs and the highly dynamic nature of workloads. To address these limitations, we propose CloudFormer, a dual-branch Transformer-based model designed to predict VM performance degradation in black-box environments. CloudFormer jointly models temporal dynamics and system-level interactions, leveraging 206 system metrics at one-second resolution across both static and dynamic scenarios. This design enables the model to capture transient interference effects and adapt to varying workload conditions without scenario-specific tuning. Complementing the methodology, we provide a fine-grained dataset that significantly expands the temporal resolution and metric diversity compared to existing benchmarks. Experimental results demonstrate that CloudFormer consistently outperforms state-of-the-art baselines across multiple evaluation metrics, achieving robust generalization across diverse and previously unseen workloads. Notably, CloudFormer attains a mean absolute error (MAE) of just 7.8%, representing a substantial improvement in predictive accuracy and outperforming existing methods at least by 28%.

In real-world Tool-Integrated Reasoning (TIR) scenarios, where LLMs interleave reasoning with external tool calls, a major source of inefficiency is that the toolcalls create pauses between LLM requests and cause KV-Cache eviction, forcing recomputation. Also, the long, unfiltered response returned by external tools inflates the KV-Cache, so each decode step spends more time loading the growing cache and thus becomes steadily slower as context length increases. However, existing efficiency metrics like token counts and toolcall counts fail to capture the real model inference latency. To address this, we introduce PTE (Prefill Token Equivalents), a hardware-aware TIR-efficiency metric that unifies internal reasoning and external tool-use costs while explicitly accounting for non-reusable KV-Cache and long-tool-response scenarios. Validation in a high-concurrency industrial setting indicates that PTE aligns significantly better with wall-clock latency than standard token counts, while maintaining consistent efficiency rankings across diverse hardware profiles. We conduct extensive experiments across five TIR benchmarks, quantify their PTE costs, and identify four inefficiency patterns that appear in TIR. We also discover that trajectories with higher PTE costs tend to have lower reasoning correctness, indicating that simply using more tools does not improve the quality of the answer.

We present a systematic, empirical evaluation of five local large language model (LLM) runtimes on Apple Silicon: MLX, MLC-LLM, llama.cpp, Ollama, and PyTorch MPS. Experiments were conducted on a Mac Studio equipped with an M2 Ultra processor and 192 GB of unified memory. Using the Qwen-2.5 model family across prompts ranging from a few hundred to 100,000 tokens, we measure time-to-first-token (TTFT), steady-state throughput, latency percentiles, long-context behavior (key-value and prompt caching), quantization support, streaming performance, batching and concurrency behavior, and deployment complexity. Under our settings, MLX achieves the highest sustained generation throughput, while MLC-LLM delivers consistently lower TTFT for moderate prompt sizes and offers stronger out-of-the-box inference features. llama.cpp is highly efficient for lightweight single-stream use, Ollama emphasizes developer ergonomics but lags in throughput and TTFT, and PyTorch MPS remains limited by memory constraints on large models and long contexts. All frameworks execute fully on-device with no telemetry, ensuring strong privacy guarantees. We release scripts, logs, and plots to reproduce all results. Our analysis clarifies the design trade-offs in Apple-centric LLM deployments and provides evidence-based recommendations for interactive and long-context processing. Although Apple Silicon inference frameworks still trail NVIDIA GPU-based systems such as vLLM in absolute performance, they are rapidly maturing into viable, production-grade solutions for private, on-device LLM inference.

The advanced function-calling capabilities of foundation models open up new possibilities for deploying agents to perform complex API tasks. However, managing large amounts of data and interacting with numerous APIs makes function calling hardware-intensive and costly, especially on edge devices. Current Large Language Models (LLMs) struggle with function calling at the edge because they cannot handle complex inputs or manage multiple tools effectively. This results in low task-completion accuracy, increased delays, and higher power consumption. In this work, we introduce Less-is-More, a novel fine-tuning-free function-calling scheme for dynamic tool selection. Our approach is based on the key insight that selectively reducing the number of tools available to LLMs significantly improves their function-calling performance, execution time, and power efficiency on edge devices. Experimental results with state-of-the-art LLMs on edge hardware show agentic success rate improvements, with execution time reduced by up to 70% and power consumption by up to 40%.

GPU kernels are critical for ML performance but difficult to optimize across diverse accelerators. We present KForge, a platform-agnostic framework built on two collaborative LLM-based agents: a generation agent that produces and iteratively refines programs through compilation and correctness feedback, and a performance analysis agent that interprets profiling data to guide optimization. This agent-based architecture requires only a single-shot example to target new platforms. We make three key contributions: (1) introducing an iterative refinement system where the generation agent and performance analysis agent collaborate through functional and optimization passes, interpreting diverse profiling data (from programmatic APIs to GUI-based tools) to generate actionable recommendations that guide program synthesis for arbitrary accelerators; (2) demonstrating that the generation agent effectively leverages cross-platform knowledge transfer, where a reference implementation from one architecture substantially improves generation quality for different hardware targets; and (3) validating the platform-agnostic nature of our approach by demonstrating effective program synthesis across fundamentally different parallel computing platforms: NVIDIA CUDA and Apple Metal.

The emergence of "vibe coding" platforms, where users describe applications in natural language and AI agents autonomously generate full-stack software, has created a need for rigorous evaluation beyond code-level benchmarks. In order to assess them as virtual software development agencies on understanding business requirements, making architectural decisions, writing production code, handling iterative modifications, and maintaining business readiness, we introduce SWE-WebDev Bench, a 68-metric evaluation framework spanning 25 primary and 43 diagnostic metrics across seven groups, organized along three dimensions: Interaction Mode (App Creation Request (ACR) vs. App Modification Request (AMR)), Agency Angle (Product Manager (PM), Engineering, Ops), and Complexity Tier (T4 multi-role SaaS, T5 AI-native). Our evaluation (six platforms, three domains, 18 evaluation cells) reveals four recurring shortcomings in the current generation of AI app builders: (1) A specification bottleneck, where platforms compress rich business requirements into oversimplified technical plans, (2) A pervasive frontend-backend decoupling, where visually polished UIs mask absent or broken backend infrastructure, (3) A steep production-readiness cliff, where no platform scores above 60% on engineering quality and post-generation human effort varies substantially across platforms and (4) Widespread security and infrastructure failures, with no platform exceeding 65% Security Score against a 90% target and concurrency handling as low as 6%. These observations are descriptive of our sample and require larger-scale replication to establish generality. We release SWE-WebDev Bench as a community benchmark to enable such replication and help platform builders identify and address these gaps. Code and benchmark resources are available at: https://github.com/snowmountainAi/webdevbench and https://webdevbench.com/.

Large models represent a groundbreaking advancement in multiple application fields, enabling remarkable achievements across various tasks. However, their unprecedented scale comes with significant computational costs. These models, often consisting of billions of parameters, require vast amounts of computational resources for execution. Especially, the expansive scale and computational demands pose considerable challenges when customizing them for particular downstream tasks, particularly over the hardware platforms constrained by computational capabilities. Parameter Efficient Fine-Tuning (PEFT) provides a practical solution by efficiently adapt the large models over the various downstream tasks. In particular, PEFT refers to the process of adjusting the parameters of a pre-trained large models to adapt it to a specific task while minimizing the number of additional parameters introduced or computational resources required. This approach is particularly important when dealing with large language models with high parameter counts, as fine-tuning these models from scratch can be computationally expensive and resource-intensive, posing considerable challenges in the supporting system platform design. In this survey, we present comprehensive studies of various PEFT algorithms, examining their performance and computational overhead. Moreover, we provide an overview of applications developed using different PEFT algorithms and discuss common techniques employed to mitigate computation costs for PEFT. In addition to the algorithmic perspective, we overview various real-world system designs to investigate the implementation costs associated with different PEFT algorithms. This survey serves as an indispensable resource for researchers aiming to understand both the PEFT algorithm and its system implementation, offering detailed insights into recent advancements and practical applications.

The interest in developing small language models (SLM) for on-device deployment is fast growing. However, the existing SLM design hardly considers the device hardware characteristics. Instead, this work presents a simple yet effective principle for SLM design: architecture searching for (near-)optimal runtime efficiency before pre-training. Guided by this principle, we develop PhoneLM SLM family (currently with 0.5B and 1.5B versions), that acheive the state-of-the-art capability-efficiency tradeoff among those with similar parameter size. We fully open-source the code, weights, and training datasets of PhoneLM for reproducibility and transparency, including both base and instructed versions. We also release a finetuned version of PhoneLM capable of accurate Android Intent invocation, and an end-to-end Android demo. All materials are available at https://github.com/UbiquitousLearning/PhoneLM.

Community GPU platforms are emerging as a cost-effective and democratized alternative to centralized GPU clusters for AI workloads, aggregating idle consumer GPUs from globally distributed and heterogeneous environments. However, their extreme hardware/software diversity, volatile availability, and variable network conditions render traditional schedulers ineffective, leading to suboptimal task completion. In this work, we present REACH (Reinforcement Learning for Efficient Allocation in Community and Heterogeneous Networks), a Transformer-based reinforcement learning framework that redefines task scheduling as a sequence scoring problem to balance performance, reliability, cost, and network efficiency. By modeling both global GPU states and task requirements, REACH learns to adaptively co-locate computation with data, prioritize critical jobs, and mitigate the impact of unreliable resources. Extensive simulation results show that REACH improves task completion rates by up to 17%, more than doubles the success rate for high-priority tasks, and reduces bandwidth penalties by over 80% compared to state-of-the-art baselines. Stress tests further demonstrate its robustness to GPU churn and network congestion, while scalability experiments confirm its effectiveness in large-scale, high-contention scenarios.

There has been growing interest in building agents that can interact with digital platforms to execute meaningful enterprise tasks autonomously. Among the approaches explored are tool-augmented agents built on abstractions such as Model Context Protocol (MCP) and web agents that operate through graphical interfaces. Yet, it remains unclear whether such complex agentic systems are necessary given their cost and operational overhead. We argue that a coding agent equipped only with a terminal and a filesystem can solve many enterprise tasks more effectively by interacting directly with platform APIs. We evaluate this hypothesis across diverse real-world systems and show that these low-level terminal agents match or outperform more complex agent architectures. Our findings suggest that simple programmatic interfaces, combined with strong foundation models, are sufficient for practical enterprise automation.

Large Language Models (LLMs) have propelled groundbreaking advancements across several domains and are commonly used for text generation applications. However, the computational demands of these complex models pose significant challenges, requiring efficient hardware acceleration. Benchmarking the performance of LLMs across diverse hardware platforms is crucial to understanding their scalability and throughput characteristics. We introduce LLM-Inference-Bench, a comprehensive benchmarking suite to evaluate the hardware inference performance of LLMs. We thoroughly analyze diverse hardware platforms, including GPUs from Nvidia and AMD and specialized AI accelerators, Intel Habana and SambaNova. Our evaluation includes several LLM inference frameworks and models from LLaMA, Mistral, and Qwen families with 7B and 70B parameters. Our benchmarking results reveal the strengths and limitations of various models, hardware platforms, and inference frameworks. We provide an interactive dashboard to help identify configurations for optimal performance for a given hardware platform.

Speculative decoding can significantly accelerate LLM serving, yet most deployments today disentangle speculator training from serving, treating speculator training as a standalone offline modeling problem. We show that this decoupled formulation introduces substantial deployment and adaptation lag: (1) high time-to-serve, since a speculator must be trained offline for a considerable period before deployment; (2) delayed utility feedback, since the true end-to-end decoding speedup is only known after training and cannot be inferred reliably from acceptance rate alone due to model-architecture and system-level overheads; and (3) domain-drift degradation, as the target model is repurposed to new domains and the speculator becomes stale and less effective. To address these issues, we present Aurora, a unified training-serving system that closes the loop by continuously learning a speculator directly from live inference traces. Aurora reframes online speculator learning as an asynchronous reinforcement-learning problem: accepted tokens provide positive feedback, while rejected speculator proposals provide implicit negative feedback that we exploit to improve sample efficiency. Our design integrates an SGLang-based inference server with an asynchronous training server, enabling hot-swapped speculator updates without service interruption. Crucially, Aurora supports day-0 deployment: a speculator can be served immediately and rapidly adapted to live traffic, improving system performance while providing immediate utility feedback. Across experiments, Aurora achieves a 1.5x day-0 speedup on recently released frontier models (e.g., MiniMax M2.1 229B and Qwen3-Coder-Next 80B). Aurora also adapts effectively to distribution shifts in user traffic, delivering an additional 1.25x speedup over a well-trained but static speculator on widely used models (e.g., Qwen3 and Llama3).

With the rise of software-as-a-service and microservice architectures, RESTful APIs are now ubiquitous in mobile and web applications. A service can have tens or hundreds of API methods, making it a challenge for programmers to find the right combination of methods to solve their task. We present APIphany, a component-based synthesizer for programs that compose calls to RESTful APIs. The main innovation behind APIphany is the use of precise semantic types, both to specify user intent and to direct the search. APIphany contributes three novel mechanisms to overcome challenges in adapting component-based synthesis to the REST domain: (1) a type inference algorithm for augmenting REST specifications with semantic types; (2) an efficient synthesis technique for "wrangling" semi-structured data, which is commonly required in working with RESTful APIs; and (3) a new form of simulated execution to avoid executing APIs calls during synthesis. We evaluate APIphany on three real-world APIs and 32 tasks extracted from GitHub repositories and StackOverflow. In our experiments, APIphany found correct solutions to 29 tasks, with 23 of them reported among top ten synthesis results.

Higher Degree by Research (HDR) candidates increasingly depend on cloud-provisioned virtual machines and local GPU hardware for their computational experiments, yet a persistent and under-addressed gap exists between having compute resources and using them productively. Cloud and infrastructure teams can provision virtual machines, but the path from a raw VM to a reproducible, GPU-ready research environment remains a significant barrier for researchers who are domain experts, not systems engineers. We identify this gap as a missing adapter layer between cloud provisioning and interactive research work. We present a lightweight, open-source solution built on k3s and Coder that implements this adapter layer and is already in active use in our research workspace environment. Our CI/CD pipeline connects GitHub directly to the local cluster, deploying research projects in under five minutes. We define a concrete metrics framework for evaluating this layer -- covering deployment latency, environment reproducibility, onboarding friction, and resource utilisation -- and establish baselines against which improvements can be measured.

Large language model agents are increasingly envisioned as always-on personal assistants with access to anything relevant in the user's digital world. Yet current systems operate over only narrow slices of that world, limiting context-sensitive reasoning and effective assistance. Existing benchmarks similarly provide only partial user state and therefore fail to capture performance in such a broad, always-on setting. To address this gap, we introduce Claw-Anything, a benchmark that expands agent context along three dimensions: long-horizon activity histories, interdependent backend services, and integrated GUI and CLI interaction across multiple devices. To instantiate this setting, we simulate months of user activity through multi-round event injection, producing complex world states and realistic noise, including irrelevant events and conflicting signals. Agents must reason over rich contextual environments while remaining robust to such noise. This expanded scope also enables the evaluation of proactive assistance, requiring agents to anticipate user needs and deliver timely recommendations. Experiments show that GPT-5.5 achieves only 34.5% pass@1, substantially below prior benchmarks, underscoring a gap between current agent capabilities and the demands of always-on personal assistance. Alongside the benchmark, we release an automated data-generation pipeline that yields 2,000 training environments and improves the base model by 23.7%, demonstrating its utility of scalable data infrastructure.

The rapid expansion of interconnected devices, autonomous systems, and AI applications has created severe fragmentation in adaptive transport systems, where diverse protocols and context sources remain isolated. This survey provides the first systematic investigation of the Model Context Protocol (MCP) as a unifying paradigm, highlighting its ability to bridge protocol-level adaptation with context-aware decision making. Analyzing established literature, we show that existing efforts have implicitly converged toward MCP-like architectures, signaling a natural evolution from fragmented solutions to standardized integration frameworks. We propose a five-category taxonomy covering adaptive mechanisms, context-aware frameworks, unification models, integration strategies, and MCP-enabled architectures. Our findings reveal three key insights: traditional transport protocols have reached the limits of isolated adaptation, MCP's client-server and JSON-RPC structure enables semantic interoperability, and AI-driven transport demands integration paradigms uniquely suited to MCP. Finally, we present a research roadmap positioning MCP as a foundation for next-generation adaptive, context-aware, and intelligent transport infrastructures.

We present BaseRT, a native Metal inference runtime for large language models (LLMs) on Apple Silicon, and report the highest inference throughput on this hardware to date. Existing runtimes, including llama.cpp and MLX-based frameworks, incur overhead from abstractions not designed for Metal's execution model or Apple Silicon's unified memory topology. By building natively on Metal with chip-specific kernel fusion, unified memory-aware optimisation, and custom dispatch logic, BaseRT recovers performance that framework-based approaches leave on the table. BaseRT supports a wide range of model families across eight quantisation formats (Q2 to FP16) on all Apple M-series devices. In this paper, we evaluate the Qwen3, Llama 3.2, and Gemma 4 families at Q4 and Q8 quantisation on M3 and M4 Pro devices. BaseRT achieves up to 1.56x higher decode throughput than llama.cpp and up to 1.35x higher than MLX, with substantially larger margins on prefill for mixture-of-experts models, delivering consistent best-in-class throughput from sub-1B to 30B parameter models. These results establish Apple Silicon as a more capable inference platform than previously reported, with direct implications for the emerging edge inference paradigm: as privacy requirements, latency constraints, and cloud cost pressures drive inference toward on-device deployment, performance-optimised local runtimes are a critical enabling layer for this transition. BaseRT is publicly available at https://github.com/basecompute/baseRT

General-purpose agents such as OpenClaw are increasingly used as autonomous tool users, but their coding ability is difficult to measure under SWE-bench: a generic agent does not by itself satisfy the clean Docker workspace, patch, and prediction contract required for scoring. We introduce Claw-SWE-Bench, a multilingual SWE-bench-style benchmark and adapter protocol that makes heterogeneous agent harnesses, or claws, comparable under fair settings including a fixed prompt, runtime budget, workspace contract, patch extraction procedure, and evaluator. The full benchmark contains 350 GitHub issue-resolution instances across 8 languages and 43 repositories, drawn from SWE-bench-Multilingual and SWE-bench-Verified-Mini after future-commit cleanup. We also release Claw-SWE-Bench Lite for faster validation, which is an 80-instance subset selected by a cost-aware, rank-aware procedure over 17 calibration columns. On the full benchmark, OpenClaw with a minimal direct-diff adapter scores only 19.1% Pass@1, whereas the full adapter reaches 73.4% with the same GLM 5.1 backbone, showing that adapter design is essential for enabling OpenClaw-style harnesses to perform coding tasks effectively. Across an OpenClaw times nine-model sweep and a five-claw times two-model sweep, model choice changes Pass@1 by 29.4 pp and harness choice by 27.4 pp under fixed models; systems with similar accuracy can differ substantially in total API cost. Claw-SWE-Bench therefore treats harness and cost accounting as first-class axes of SWE-style coding-agent evaluation, providing both a full benchmark and a low-cost reference set for reproducible comparison. The data is available at https://github.com/opensquilla/claw-swe-bench and https://huggingface.co/datasets/TokenRhythm/Claw-SWE-Bench.

Autonomous agents capable of operating complex graphical user interfaces (GUIs) have the potential to transform desktop automation. While recent advances in large language models (LLMs) have significantly improved UI understanding, navigating full-window, multi-application desktop environments remains a major challenge. Data availability is limited by costly manual annotation, closed-source datasets and surface-level synthetic pipelines. We introduce GUIrilla, an automated scalable framework that systematically explores applications via native accessibility APIs to address the critical data collection challenge in GUI automation. Our framework focuses on macOS - an ecosystem with limited representation in current UI datasets - though many of its components are designed for broader cross-platform applicability. GUIrilla organizes discovered interface elements and crawler actions into hierarchical GUI graphs and employs specialized interaction handlers to achieve comprehensive application coverage. Using the application graphs from GUIrilla crawler, we construct and release GUIrilla-Task, a large-scale dataset of 27,171 functionally grounded tasks across 1,108 macOS applications, each annotated with full-desktop and window-level screenshots, accessibility metadata, and semantic action traces. Empirical results show that tuning LLM-based agents on GUIrilla-Task significantly improves performance on downstream UI tasks, outperforming synthetic baselines on the ScreenSpot Pro benchmark while using 97% less data. We also release macapptree, an open-source library for reproducible collection of structured accessibility metadata, along with the full GUIrilla-Task dataset, the manually verified GUIrilla-Gold benchmark, and the framework code to support open research in desktop autonomy.

Existing online benchmarks for mobile GUI agents remain largely app-centric and task-homogeneous, failing to reflect the diversity and instability of real-world mobile usage. To this end, we introduce VenusBench-Mobile, a challenging online benchmark for evaluating general-purpose mobile GUI agents under realistic, user-centric conditions. VenusBench-Mobile builds two core evaluation pillars: defining what to evaluate via user-intent-driven task design that reflects real mobile usage, and how to evaluate through a capability-oriented annotation scheme for fine-grained agent behavior analysis. Extensive evaluation of state-of-the-art mobile GUI agents reveals large performance gaps relative to prior benchmarks, indicating that VenusBench-Mobile poses substantially more challenging and realistic tasks and that current agents remain far from reliable real-world deployment. Diagnostic analysis further shows that failures are dominated by deficiencies in perception and memory, which are largely obscured by coarse-grained evaluations. Moreover, even the strongest agents exhibit near-zero success under environment variations, highlighting their brittleness in realistic settings. Based on these insights, we believe VenusBench-Mobile provides an important stepping stone toward robust real-world deployment of mobile GUI agents. Code and data are available at https://github.com/inclusionAI/UI-Venus/tree/VenusBench-Mobile.

Quantization is a practical technique for making large language models easier to deploy by reducing the precision used to store and operate on model weights. This can lower memory use and improve runtime feasibility on constrained hardware, which is especially relevant for users running models locally. Quantization in llama.cpp enables large language models to run on commodity hardware, but available formats are often evaluated inconsistently, making it hard to choose among schemes. We present a unified empirical study of the llama.cpp quantization on a single modern model, Llama-3.1-8B-Instruct (FP16, GGUF), covering 3-8 bit K-quant and legacy formats. We evaluate downstream task performance across standard reasoning, knowledge, instruction-following, and truthfulness benchmarks, and also measure perplexity and CPU throughput (prefill/decoding) alongside model size, compression, and quantization time. Ultimately, this work is a practical guide for choosing a llama.cpp quantization scheme, helping readers make informed, context-aware decisions for their intended use and resource budget.

Pushing the boundaries of machine learning often requires exploring different hardware and software combinations. However, the freedom to experiment across different tooling stacks can be at odds with the drive for efficiency, which has produced increasingly specialized AI hardware and incentivized consolidation around a narrow set of ML frameworks. Exploratory research can be restricted if software and hardware are co-evolving, making it even harder to stray away from mainstream ideas that work well with popular tooling stacks. While this friction increasingly impacts the rate of innovation in machine learning, to our knowledge the lack of portability in tooling has not been quantified. In this work, we ask: How portable are popular ML software frameworks? We conduct a large-scale study of the portability of mainstream ML frameworks across different hardware types. Our findings paint an uncomfortable picture -- frameworks can lose more than 40% of their key functions when ported to other hardware. Worse, even when functions are portable, the slowdown in their performance can be extreme and render performance untenable. Collectively, our results reveal how costly straying from a narrow set of hardware-software combinations can be - and suggest that specialization of hardware impedes innovation in machine learning research.

In the rapidly evolving domain of artificial intelligence, Large Language Models (LLMs) play a crucial role due to their advanced text processing and generation abilities. This study introduces a new strategy aimed at harnessing on-device LLMs in invoking software APIs. We meticulously compile a dataset derived from software API documentation and apply fine-tuning to LLMs with capacities of 2B, 3B and 7B parameters, specifically to enhance their proficiency in software API interactions. Our approach concentrates on refining the models' grasp of API structures and syntax, significantly enhancing the accuracy of API function calls. Additionally, we propose conditional masking techniques to ensure outputs in the desired formats and reduce error rates while maintaining inference speeds. We also propose a novel benchmark designed to evaluate the effectiveness of LLMs in API interactions, establishing a foundation for subsequent research. Octopus, the fine-tuned model, is proved to have better performance than GPT-4 for the software APIs calling. This research aims to advance automated software development and API integration, representing substantial progress in aligning LLM capabilities with the demands of practical software engineering applications.

Automatic software system optimization can improve software speed, reduce operating costs, and save energy. Traditional approaches to optimization rely on manual tuning and compiler heuristics, limiting their ability to generalize across diverse codebases and system contexts. Recent methods using Large Language Models (LLMs) offer automation to address these limitations, but often fail to scale to the complexity of real-world software systems and applications. We present SysLLMatic, a system that integrates LLMs with profiling-guided feedback and system performance insights to automatically optimize software code. We evaluate it on three benchmark suites: HumanEval_CPP (competitive programming in C++), SciMark2 (scientific kernels in Java), and DaCapoBench (large-scale software systems in Java). Results show that SysLLMatic can improve system performance, including latency, throughput, energy efficiency, memory usage, and CPU utilization. It consistently outperforms state-of-the-art LLM baselines on microbenchmarks. On large-scale application codes, it surpasses traditional compiler optimizations, achieving average relative improvements of 1.85x in latency and 2.24x in throughput. Our findings demonstrate that LLMs, guided by principled systems thinking and appropriate performance diagnostics, can serve as viable software system optimizers. We further identify limitations of our approach and the challenges involved in handling complex applications. This work provides a foundation for generating optimized code across various languages, benchmarks, and program sizes in a principled manner.

Personalized mobile agents that infer user preferences and calibrate proactive assistance hold great promise as everyday digital assistants, yet existing benchmarks fail to capture what this requires. Prior work evaluates preference recovery from static histories or intent prediction from fixed contexts. Neither tests whether an agent can elicit missing preferences through interaction, nor whether it can decide when to intervene, seek consent, or remain silent in a live GUI environment. We introduce KnowU-Bench, an online benchmark for personalized mobile agents built on a reproducible Android emulation environment, covering 42 general GUI tasks, 86 personalized tasks, and 64 proactive tasks. Unlike prior work that treats user preferences as static context, KnowU-Bench hides the user profile from the agent and exposes only behavioral logs, forcing genuine preference inference rather than context lookup. To support multi-turn preference elicitation, it instantiates an LLM-driven user simulator grounded in structured profiles, enabling realistic clarification dialogues and proactive consent handling. Beyond personalization, KnowU-Bench provides comprehensive evaluation of the complete proactive decision chain, including grounded GUI execution, consent negotiation, and post-rejection restraint, evaluated through a hybrid protocol combining rule-based verification with LLM-as-a-Judge scoring. Our experiments reveal a striking degradation: agents that excel at explicit task execution fall below 50% under vague instructions requiring user preference inference or intervention calibration, even for frontier models like Claude Sonnet 4.6. The core bottlenecks are not GUI navigation but preference acquisition and intervention calibration, exposing a fundamental gap between competent interface operation and trustworthy personal assistance.

Large language models (LLMs) increasingly rely on external tools and APIs to execute complex tasks specified in natural language. Evaluating such tool calling capabilities in realistic enterprise settings is challenging: APIs are often proprietary, heterogeneous, and difficult to share, limiting reproducible benchmarks. To address this, we introduce Live API Bench, a comprehensive benchmark constructed by transforming NL2SQL datasets into interactive API environments. Our pipeline converts SQL queries from BIRD SQL into executable API sequences across three formulations SLOT, SEL, and REST covering minimal general purpose operations, domain specific multi step tasks, and function oriented RESTful interactions, respectively. The benchmark spans 11 databases with over 2,500 invocable tools, paired with human authored queries, ground truth API sequences, and verified final answers. Live API Bench enables systematic evaluation of core challenges in tool use, including error handling, sequential reasoning, parameter generation, response parsing, and robustness across diverse domains. We evaluate 10 LLMs and 4 ReACT agents, observing low task completion rates (7 to 47pct), which improve modestly to 50pct under interactive agent settings, highlighting substantial scope for improving LLM tool calling performance. We release all code and data associated with this paper.

Spec-driven development (SDD) with AI coding agents provides a structured workflow, but agents often remain "context blind" in large, evolving repositories, leading to hallucinated APIs and architectural violations. We present Spec Kit Agents, a multi-agent SDD pipeline (with PM and developer roles) that adds phase-level, context-grounding hooks. Read-only probing hooks ground each stage (Specify, Plan, Tasks, Implement) in repository evidence, while validation hooks check intermediate artifacts against the environment. We evaluate 128 runs covering 32 features across five repositories. Context-grounding hooks improve judged quality by +0.15 on a 1-5 composite LLM-as-judge score (+3.0 percent of the full score; Wilcoxon signed-rank, p < 0.05) while maintaining 99.7-100 percent repository-level test compatibility. We further evaluate the framework on SWE-bench Lite, where augmentation hooks improve baseline by 1.7 percent, achieving 58.2 percent Pass@1.

Training modern deep learning models is increasingly constrained by GPU memory and compute limits. While Randomized Numerical Linear Algebra (RandNLA) offers proven techniques to compress these models, the lack of a unified, production-grade library prevents widely adopting these methods. We present Panther, a PyTorch-compatible library that consolidates established RandNLA algorithms into a single high-performance framework. Panther engineers efficient, drop-in replacements for standard components including sketched linear layers, 2D convolution, multi-head attention, and randomized matrix decompositions (such as pivoted CholeskyQR). By implementing a custom C++/CUDA backend (pawX), Panther provides an optimized implementation that can run on both CPUs and GPUs. We demonstrate the effectiveness of RandNLA techniques and Panther's ease of adoption. By replacing standard PyTorch linear layers with Panther layers (requiring only a few lines of code) we achieve significant memory savings (up to 75%) on BERT while maintaining comparable loss. Source code is available (MIT License) at https://github.com/FahdSeddik/panther, along with demonstration video at https://youtu.be/7M3RQb4KWxs.

Programmable switches are driving a massive increase in fine-grained measurements. This puts significant pressure on telemetry collectors that have to process reports from many switches. Past research acknowledged this problem by either improving collectors' stack performance or by limiting the amount of data sent from switches. In this paper, we take a different and radical approach: switches are responsible for directly inserting queryable telemetry data into the collectors' memory, bypassing their CPU, and thereby improving their collection scalability. We propose to use a method we call direct telemetry access, where switches jointly write telemetry reports directly into the same collector's memory region, without coordination. Our solution, DART, is probabilistic, trading memory redundancy and query success probability for CPU resources at collectors. We prototype DART using commodity hardware such as P4 switches and RDMA NICs and show that we get high query success rates with a reasonable memory overhead. For example, we can collect INT path tracing information on a fat tree topology without a collector's CPU involvement while achieving 99.9\% query success probability and using just 300 bytes per flow.

The widespread availability of open-source repositories has led to a vast collection of reusable software components, yet their utilization remains manual, error-prone, and disconnected. Developers must navigate documentation, understand APIs, and write integration code, creating significant barriers to efficient software reuse. To address this, we present EnvX, a framework that leverages Agentic AI to agentize GitHub repositories, transforming them into intelligent, autonomous agents capable of natural language interaction and inter-agent collaboration. Unlike existing approaches that treat repositories as static code resources, EnvX reimagines them as active agents through a three-phase process: (1) TODO-guided environment initialization, which sets up the necessary dependencies, data, and validation datasets; (2) human-aligned agentic automation, allowing repository-specific agents to autonomously perform real-world tasks; and (3) Agent-to-Agent (A2A) protocol, enabling multiple agents to collaborate. By combining large language model capabilities with structured tool integration, EnvX automates not just code generation, but the entire process of understanding, initializing, and operationalizing repository functionality. We evaluate EnvX on the GitTaskBench benchmark, using 18 repositories across domains such as image processing, speech recognition, document analysis, and video manipulation. Our results show that EnvX achieves a 74.07% execution completion rate and 51.85% task pass rate, outperforming existing frameworks. Case studies further demonstrate EnvX's ability to enable multi-repository collaboration via the A2A protocol. This work marks a shift from treating repositories as passive code resources to intelligent, interactive agents, fostering greater accessibility and collaboration within the open-source ecosystem.

In the machine learning ecosystem, hardware selection is often regarded as a mere utility, overshadowed by the spotlight on algorithms and data. This oversight is particularly problematic in contexts like ML-as-a-service platforms, where users often lack control over the hardware used for model deployment. How does the choice of hardware impact generalization properties? This paper investigates the influence of hardware on the delicate balance between model performance and fairness. We demonstrate that hardware choices can exacerbate existing disparities, attributing these discrepancies to variations in gradient flows and loss surfaces across different demographic groups. Through both theoretical and empirical analysis, the paper not only identifies the underlying factors but also proposes an effective strategy for mitigating hardware-induced performance imbalances.

The growing demand for on-device large language model (LLM) inference is driving interest in deploying lightweight, cost-effective AI solutions on edge hardware. Single-board computers (SBCs) such as the Raspberry Pi and Orange Pi offer a promising platform for localized, privacy-preserving inference-but remain underexplored in the context of LLM workloads. In this work, we benchmark the performance of 25 quantized open-source LLMs across three SBCs-Raspberry Pi 4, Raspberry Pi 5, and Orange Pi 5 Pro-using two inference runtimes: Ollama and Llamafile. We evaluate generation throughput, memory usage, and power consumption under varying CPU configurations, using multiple prompt types to simulate realistic workloads. Our results show that SBCs can reliably support models up to 1.5B parameters, with Llamafile achieving up to 4x higher throughput and 30-40% lower power usage than Ollama. We identify architecture-specific bottlenecks, highlight runtime-level trade-offs, and provide practical deployment recommendations. This study offers the first broad evaluation of LLM inference on SBCs, bridging the gap between high-performance language models and affordable edge computing.

The high memory and computation demand of large language models (LLMs) makes them challenging to be deployed on consumer devices due to limited GPU memory. Offloading can mitigate the memory constraint but often suffers from low GPU utilization, leading to low inference efficiency. In this work, we propose a novel framework, called pipelined offloading (PIPO), for efficient inference on consumer devices. PIPO designs a fine-grained offloading pipeline, complemented with optimized data transfer and computation, to achieve high concurrency and efficient scheduling for inference. Experimental results show that compared with state-of-the-art baseline, PIPO increases GPU utilization from below 40% to over 90% and achieves up to 3.1times higher throughput, running on a laptop equipped with a RTX3060 GPU of 6GB memory.

As high-quality public text approaches exhaustion, a phenomenon known as the Data Wall, pre-training is shifting from more tokens to better tokens. However, existing methods either rely on heuristic static filters that ignore training dynamics, or use dynamic yet optimizer-agnostic criteria based on raw gradients. We propose OPUS (Optimizer-induced Projected Utility Selection), a dynamic data selection framework that defines utility in the optimizer-induced update space. OPUS scores candidates by projecting their effective updates, shaped by modern optimizers, onto a target direction derived from a stable, in-distribution proxy. To ensure scalability, we employ Ghost technique with CountSketch for computational efficiency, and Boltzmann sampling for data diversity, incurring only 4.7\% additional compute overhead. OPUS achieves remarkable results across diverse corpora, quality tiers, optimizers, and model scales. In pre-training of GPT-2 Large/XL on FineWeb and FineWeb-Edu with 30B tokens, OPUS outperforms industrial-level baselines and even full 200B-token training. Moreover, when combined with industrial-level static filters, OPUS further improves pre-training efficiency, even with lower-quality data. Furthermore, in continued pre-training of Qwen3-8B-Base on SciencePedia, OPUS achieves superior performance using only 0.5B tokens compared to full training with 3B tokens, demonstrating significant data efficiency gains in specialized domains.

LLMs are widely adopted in production, pushing inference systems to their limits. Disaggregated LLM serving (e.g., PD separation and KV state disaggregation) improves scalability and cost efficiency, but it also turns KV into an explicit payload crossing network and storage boundaries, making KV a dominant end-to-end bottleneck. Existing KV compression are typically static runtime configurations, despite production service context varies over time in workload mix, bandwidth, and SLO/quality budgets. As a result, a fixed choice can be suboptimal or even increase latency. We present KVServe, the first service-aware and adaptive KV communication compression framework for disaggregated LLM serving: KVServe (1) unifies KV compression into a modular strategy space with new components and cross-method recomposition; (2) introduces Bayesian Profiling Engine that efficiently searches this space and distills a 3D Pareto candidate set, reducing 50times offline search overhead; and (3) deploys a Service-Aware Online Controller that combines an analytical latency model with a lightweight bandit to select profiles under constraints and correct offline-to-online mismatch. Integrated into vLLM and evaluated across datasets, models, GPUs and networks, KVServe achieves up to 9.13times JCT speedup in PD-separated serving and up to 32.8times TTFT reduction in KV-disaggregated serving.

Current operating systems expose interfaces optimized for human users but not for AI agents. Humans benefit from pixels, icons, windows, visual grouping, mouse movement, and keyboard shortcuts; AI agents instead need compact semantic state, grounded actions, and reliable feedback. As a result, many computer-use agents are forced to interpret screenshots, OCR output, and visual crops, introducing high token costs, visual ambiguity, latency, and coordinate uncertainty. This paper introduces LUMOS (Language Model Unified Machine-Readable Operating-System Semantics), a semantic interaction layer between AI agents and operating systems. LUMOS converts native accessibility metadata and browser UI structures into machine readable semantic blueprints with stable identifiers, roles, names, values, bounds, and action affordances. It also supports live semantic pointer grounding by querying the UI element under or near the cursor through operating-system automation APIs. An LLM then acts through an accessibility grounded observe act loop using constrained visible-UI primitives rather than application-specific scripts. LUMOS does not claim to replace visual agents; instead, it reduces dependence on screenshots when operating systems already provide semantic structure. These results suggest a path toward AI-native operating systems and machine-readable interaction layers.

Prediction APIs offered for a fee are a fast-growing industry and an important part of machine learning as a service. While many such services are available, the heterogeneity in their price and performance makes it challenging for users to decide which API or combination of APIs to use for their own data and budget. We take a first step towards addressing this challenge by proposing FrugalML, a principled framework that jointly learns the strength and weakness of each API on different data, and performs an efficient optimization to automatically identify the best sequential strategy to adaptively use the available APIs within a budget constraint. Our theoretical analysis shows that natural sparsity in the formulation can be leveraged to make FrugalML efficient. We conduct systematic experiments using ML APIs from Google, Microsoft, Amazon, IBM, Baidu and other providers for tasks including facial emotion recognition, sentiment analysis and speech recognition. Across various tasks, FrugalML can achieve up to 90% cost reduction while matching the accuracy of the best single API, or up to 5% better accuracy while matching the best API's cost.

Graphical user interface (GUI) agents build on vision-language models to complete user tasks end-to-end in real applications through interface actions such as tapping, swiping, text entry, and navigation. However, existing GUI agents are trained and evaluated largely on offline trajectories, simulated environments, and standardized benchmarks. These differ substantially from real applications in interface layout, interaction logic, and abnormal-state distribution, and cannot faithfully characterize execution stability in real-world use, where account states, permission dialogs, payment authentication, and risk control continually reshape the state distribution and open a persistent gap between benchmark scores and real usability. To close this gap, we propose Xiaomi-GUI-0, a native multimodal GUI agent for real mobile environments, trained and evaluated within a real-device closed loop. At its core is a real-device-dominant hybrid infrastructure, where physical devices are the primary execution environment and sandboxes provide auxiliary support, so that data collection, training, rollout, and evaluation share an execution distribution close to real deployment. We construct multi-source training data spanning high-frequency head tasks, high-generalization data for long-tail intents, and capability-enhancement data for reflection and memory, and introduce an error-driven data flywheel that turns failure trajectories into corrected actions, reflective explanations, and recovery demonstrations. The model is trained through a progressive three-stage pipeline of supervised fine-tuning, step-level reinforcement learning, and agentic reinforcement learning. Evaluated on public benchmarks and our in-house RealMobile, Xiaomi-GUI-0 achieves 72.0% success on RealMobile and 78.9% on AndroidWorld, while substantially improving execution stability and abnormal-state recognition in real-world tasks.

The development of GUI agents could revolutionize the next generation of human-computer interaction. Motivated by this vision, we present MAI-UI, a family of foundation GUI agents spanning the full spectrum of sizes, including 2B, 8B, 32B, and 235B-A22B variants. We identify four key challenges to realistic deployment: the lack of native agent-user interaction, the limits of UI-only operation, the absence of a practical deployment architecture, and brittleness in dynamic environments. MAI-UI addresses these issues with a unified methodology: a self-evolving data pipeline that expands the navigation data to include user interaction and MCP tool calls, a native device-cloud collaboration system routes execution by task state, and an online RL framework with advanced optimizations to scale parallel environments and context length. MAI-UI establishes new state-of-the-art across GUI grounding and mobile navigation. On grounding benchmarks, it reaches 73.5% on ScreenSpot-Pro, 91.3% on MMBench GUI L2, 70.9% on OSWorld-G, and 49.2% on UI-Vision, surpassing Gemini-3-Pro and Seed1.8 on ScreenSpot-Pro. On mobile GUI navigation, it sets a new SOTA of 76.7% on AndroidWorld, surpassing UI-Tars-2, Gemini-2.5-Pro and Seed1.8. On MobileWorld, MAI-UI obtains 41.7% success rate, significantly outperforming end-to-end GUI models and competitive with Gemini-3-Pro based agentic frameworks. Our online RL experiments show significant gains from scaling parallel environments from 32 to 512 (+5.2 points) and increasing environment step budget from 15 to 50 (+4.3 points). Finally, the native device-cloud collaboration system improves on-device performance by 33%, reduces cloud model calls by over 40%, and preserves user privacy.

The rapid development of large language models and multimodal large language models has accelerated the emergence of proactive agents capable of operating everyday tools and assisting users in real-world environments. However, existing benchmarks struggle to evaluate such agents effectively, as they often rely on sandboxed environments and single-turn evaluation paradigms. Moreover, their scenario-based task taxonomies mix multiple model capabilities within the same task category, making it difficult to identify the root causes of agent failures. To address these limitations, we introduce UniClawBench, the first capability-driven benchmark designed to evaluate proactive agents in dynamic, real-world settings. UniClawBench is built around five foundational model capabilities: Skill Usage, Exploration, Long-Context Reasoning, Multimodal Understanding, and Cross-Platform Coordination. Based on these capabilities, we design 400 bilingual real-world tasks. Unlike previous benchmarks that rely on static, pre-recorded answers, our benchmark evaluates agents in live Docker containers using fine-grained, step-by-step completion checkpoints. Furthermore, we design a closed-loop evaluation strategy comprising an executor agent, a hidden supervisor agent, and a user agent to simulate realistic multi-turn human feedback without leaking grading criteria. To disentangle base model capabilities from framework-level design choices, we evaluate state-of-the-art models under multiple agent frameworks. Through comprehensive comparisons across both models and frameworks, we show how base model capabilities and agent framework designs jointly shape performance in real-world environments. To facilitate future research, we make our benchmark and code publicly available at https://github.com/HKU-MMLab/UniClawBench.

Prediction markets are designed to aggregate dispersed information about future events, yet today's ecosystem is fragmented across heterogeneous operator-run platforms and blockchain-based protocols that independently list economically identical events. In the absence of a shared notion of event identity, liquidity fails to pool across venues, arbitrage becomes capital-intensive or unenforceable, and prices systematically violate the Law of One Price. As a result, market prices reflect platform-local beliefs rather than a single, globally aggregated probability, undermining the core information-aggregation function of prediction markets. We address this gap by introducing a semantic alignment framework that makes cross-platform event identity explicit through joint analysis of natural-language descriptions, resolution semantics, and temporal scope. Applying this framework, we construct the first human-validated, cross-platform dataset of aligned prediction markets, covering over 100 000 events across ten major venues from 2018 to 2025. Using this dataset, we show that roughly 6% of all events are concurrently listed across platforms and that semantically equivalent markets exhibit persistent execution-aware price deviations of 2-4% on average, even in highly liquid and information-rich settings. These mispricings give rise to persistent cross-platform arbitrage opportunities driven by structural frictions rather than informational disagreement. Overall, our results demonstrate that semantic non-fungibility is a fundamental barrier to price convergence, and that resolving event identity is a prerequisite for prediction markets to aggregate information at a global scale.

Emergency of DeepSeek R1 and QwQ 32B have broken through performance barriers for running frontier large language models (LLMs) on home devices. While consumer hardware is getting stronger and model quantization is improving, existing end-side solutions still demand GPU clusters, large RAM/VRAM, and high bandwidth, far beyond what a common home cluster can handle. This paper introduces prima.cpp, a distributed inference system that runs 70B-scale models on everyday home devices using a mix of CPU/GPU, low RAM/VRAM, Wi-Fi, and cross-platform support. It uses mmap to manage model weights and introduces piped-ring parallelism with prefetching to hide disk loading. By modeling heterogeneity in computation, communication, disk, memory (and its management behavior), and OS, it optimally assigns model layers to each device's CPU and GPU, further reducing token latency. An elegant algorithm named Halda is proposed to solve this NP-hard assignment problem. We evaluate prima.cpp on a common four-node home cluster. It outperforms llama.cpp, exo, and dllama on 30B+ models while keeping memory pressure below 6%. This brings frontier 30B-70B models, such as Llama 3, DeepSeek R1, Qwen 2.5, and QwQ to home assistants, making advanced AI truly accessible to individuals. The code is open source and available at https://github.com/Lizonghang/prima.cpp.

This report introduces the Qwen2 series, the latest addition to our large language models and large multimodal models. We release a comprehensive suite of foundational and instruction-tuned language models, encompassing a parameter range from 0.5 to 72 billion, featuring dense models and a Mixture-of-Experts model. Qwen2 surpasses most prior open-weight models, including its predecessor Qwen1.5, and exhibits competitive performance relative to proprietary models across diverse benchmarks on language understanding, generation, multilingual proficiency, coding, mathematics, and reasoning. The flagship model, Qwen2-72B, showcases remarkable performance: 84.2 on MMLU, 37.9 on GPQA, 64.6 on HumanEval, 89.5 on GSM8K, and 82.4 on BBH as a base language model. The instruction-tuned variant, Qwen2-72B-Instruct, attains 9.1 on MT-Bench, 48.1 on Arena-Hard, and 35.7 on LiveCodeBench. Moreover, Qwen2 demonstrates robust multilingual capabilities, proficient in approximately 30 languages, spanning English, Chinese, Spanish, French, German, Arabic, Russian, Korean, Japanese, Thai, Vietnamese, and more, underscoring its versatility and global reach. To foster community innovation and accessibility, we have made the Qwen2 model weights openly available on Hugging Face1 and ModelScope2, and the supplementary materials including example code on GitHub3. These platforms also include resources for quantization, fine-tuning, and deployment, facilitating a wide range of applications and research endeavors.

Training Vision-Language Models (VLMs) for Graphical User Interfaces (GUI) agents via Reinforcement Learning (RL) faces critical challenges: environment-based RL requires costly interactions, while environment-free methods struggle with distribution shift and reward generalization. We propose an environment-free RL framework that decouples value estimation from policy optimization by leveraging a pretrained Value Environment Model (VEM). VEM predicts state-action values directly from offline data, distilling human-like priors about GUI interaction outcomes without requiring next-state prediction or environmental feedback. This avoids compounding errors and enhances resilience to UI changes by focusing on semantic reasoning (e.g., Does this action advance the user's goal?). The framework operates in two stages: (1) pretraining VEM to estimate long-term action utilities and (2) guiding policy exploration with frozen VEM signals, enabling layout-agnostic GUI automation. Evaluated on Android-in-the-Wild benchmarks, VEM achieves state-of-the-art performance in both offline and online settings, outperforming environment-free baselines significantly and matching environment-based approaches without interaction costs. Importantly, VEM demonstrates that semantic-aware value estimation can achieve comparable performance with online-trained methods.

A core abstraction in early Unix systems was the principle that 'everything is a file', enabling heterogeneous devices and kernel resources to be manipulated via uniform read/write interfaces. This paper explores how an analogous unification is emerging in contemporary agentic AI. We trace the evolution from Unix to DevOps, Infrastructure-as-Code, and finally autonomous software agents, highlighting how file-like abstractions and code-based specifications collapse diverse resources into consistent, composable interfaces. The resulting perspective suggests that adopting file- and code-centric interaction models may enable agentic systems that are more maintainable, auditable, and operationally robust.

Large language models (LLMs) have achieved success, but cost and privacy constraints necessitate deploying smaller models locally while offloading complex queries to cloud-based models. Existing router evaluations are unsystematic, overlooking scenario-specific requirements and out-of-distribution robustness. We propose RouterXBench, a principled evaluation framework with three dimensions: router ability, scenario alignment, and cross-domain robustness. Unlike prior work that relies on output probabilities or external embeddings, we utilize internal hidden states that capture model uncertainty before answer generation. We introduce ProbeDirichlet, a lightweight router that aggregates cross-layer hidden states via learnable Dirichlet distributions with probabilistic training. Trained on multi-domain data, it generalizes robustly across in-domain and out-of-distribution scenarios. Our results show ProbeDirichlet achieves 16.68% and 18.86% relative improvements over the best baselines in router ability and high-accuracy scenarios, with consistent performance across model families, model scales, heterogeneous tasks, and agentic workflows.

Running large language models on consumer devices such as laptops and desktops is challenging because model weights often exceed GPU memory capacity, making offloading inference necessary to extend effective model capacity with CPU memory. Existing offloading systems, however, typically rely on coarse layer-level or expert-level scheduling, which overlooks substantial heterogeneity among tensors within the same layer and adapts poorly to changing hardware load conditions on such devices. This paper presents ATSInfer, a hybrid CPU-GPU inference system for consumer devices that performs offloading at tensor granularity. ATSInfer combines static tensor placement with load-aware dynamic transfer, and introduces asynchronous CPU-GPU coordination to efficiently schedule hardware storage, data movement, and computation across heterogeneous backends. We implement ATSInfer and evaluate it on representative consumer platforms using both dense and MoE models. Compared with existing systems, ATSInfer improves prefill throughput by up to 1.94times and decode throughput by up to 3.29times, while also increasing GPU utilization and making more effective use of PCIe bandwidth. These results show that ATSInfer can substantially improve the user experience of local LLM deployment on personal consumer devices.

Locating the files and functions requiring modification in large open-source software (OSS) repositories is challenging due to their scale and structural complexity. Existing large language model (LLM)-based methods typically treat this as a repository-level retrieval task and rely on multiple auxiliary tools, which overlook code execution logic and complicate model control. We propose RepoNavigator, an LLM agent equipped with a single execution-aware tool-jumping to the definition of an invoked symbol. This unified design reflects the actual flow of code execution while simplifying tool manipulation. RepoNavigator is trained end-to-end via Reinforcement Learning (RL) directly from a pretrained model, without any closed-source distillation. Experiments demonstrate that RL-trained RepoNavigator achieves state-of-the-art performance, with the 7B model outperforming 14B baselines, the 14B model surpassing 32B competitors, and even the 32B model exceeding closed-source models such as Claude-3.7. These results confirm that integrating a single, structurally grounded tool with RL training provides an efficient and scalable solution for repository-level issue localization.

Large language models are increasingly evolving from text generators into general agents capable of understanding user requests, invoking external tools, and completing complex tasks through interaction. However, existing agent benchmarks often focus on limited scenarios, tool ecosystems, or interaction formats, making it difficult to systematically characterize model capabilities across heterogeneous application settings. We introduce OmniaBench, a benchmark for evaluating general agents across diverse scenarios with explicit state spaces. We derive application-oriented scenario knowledge from app stores, product documents, industry resources, Web retrieval, and human refinement, forming a hierarchical taxonomy that spans ToC, ToB and ToE with 90 level-1 and 354 level-2 domains. Based on this taxonomy, we construct executable environments and synthesize single-turn and multi-turn tasks through four complementary routes: DAG, DAG-S, Solver, and Program. OmniaBench further introduces a ten-dimensional capability taxonomy and eight compositional atomic difficulty factors to support fine-grained evaluation and analysis. The resulting dataset contains 1,431 tasks, together with a challenging subset of 644 tasks designed to reduce evaluation cost and mitigate potential contamination of the full set after public release. The bench presents substantial challenges to current frontier models, with even Claude-Sonnet-5 and GPT-5.6-Sol achieving Overall Pass@1 scores of only 58.54 and 57.14, respectively. Further analyses reveal clear differences across domains and capabilities, as well as persistent limitations in planning, constraint maintenance, and adaptive correction. OmniaBench provides a broad and diagnostic benchmark for characterizing the capability boundaries of general agents.

Building agents that generalize across web, desktop, and mobile environments remains an open challenge, as prior systems rely on environment-specific interfaces that limit cross-platform deployment. We introduce Surfer 2, a unified architecture operating purely from visual observations that achieves state-of-the-art performance across all three environments. Surfer 2 integrates hierarchical context management, decoupled planning and execution, and self-verification with adaptive recovery, enabling reliable operation over long task horizons. Our system achieves 97.1% accuracy on WebVoyager, 69.6% on WebArena, 60.1% on OSWorld, and 87.1% on AndroidWorld, outperforming all prior systems without task-specific fine-tuning. With multiple attempts, Surfer 2 exceeds human performance on all benchmarks. These results demonstrate that systematic orchestration amplifies foundation model capabilities and enables general-purpose computer control through visual interaction alone, while calling for a next-generation vision language model to achieve Pareto-optimal cost-efficiency.

The success of language models in code assistance has spurred the proposal of repository-level code completion as a means to enhance prediction accuracy, utilizing the context from the entire codebase. However, this amplified context can inadvertently increase inference latency, potentially undermining the developer experience and deterring tool adoption - a challenge we termed the Context-Latency Conundrum. This paper introduces REPOFUSE, a pioneering solution designed to enhance repository-level code completion without the latency trade-off. REPOFUSE uniquely fuses two types of context: the analogy context, rooted in code analogies, and the rationale context, which encompasses in-depth semantic relationships. We propose a novel rank truncated generation (RTG) technique that efficiently condenses these contexts into prompts with restricted size. This enables REPOFUSE to deliver precise code completions while maintaining inference efficiency. Through testing with the CrossCodeEval suite, REPOFUSE has demonstrated a significant leap over existing models, achieving a 40.90% to 59.75% increase in exact match (EM) accuracy for code completions and a 26.8% enhancement in inference speed. Beyond experimental validation, REPOFUSE has been integrated into the workflow of a large enterprise, where it actively supports various coding tasks.

Large Language Models (LLMs) have emerged as powerful tools for addressing modern challenges and enabling practical applications. However, their computational expense remains a significant barrier to widespread adoption. Quantization has emerged as a promising technique to democratize access and enable low resource device deployment. Despite these advancements, the safety and trustworthiness of quantized models remain underexplored, as prior studies often overlook contemporary architectures and rely on overly simplistic benchmarks and evaluations. To address this gap, we introduce OpenSafetyMini, a novel open-ended safety dataset designed to better distinguish between models. We evaluate 4 state-of-the-art quantization techniques across LLaMA and Mistral models using 4 benchmarks, including human evaluations. Our findings reveal that the optimal quantization method varies for 4-bit precision, while vector quantization techniques deliver the best safety and trustworthiness performance at 2-bit precision, providing foundation for future research.

Large language models (LLMs) have limitations in handling tasks that require real-time access to external APIs. While several benchmarks like ToolBench and APIGen have been developed to assess LLMs' API-use capabilities, they often suffer from issues such as lack of generalizability, limited multi-step reasoning coverage, and instability due to real-time API fluctuations. In this paper, we introduce SEAL, an end-to-end testbed designed to evaluate LLMs in real-world API usage. SEAL standardizes existing benchmarks, integrates an agent system for testing API retrieval and planning, and addresses the instability of real-time APIs by introducing a GPT-4-powered API simulator with caching for deterministic evaluations. Our testbed provides a comprehensive evaluation pipeline that covers API retrieval, API calls, and final responses, offering a reliable framework for structured performance comparison in diverse real-world scenarios. SEAL is publicly available, with ongoing updates for new benchmarks.

LLM agents are rapidly evolving from coding assistants into autonomous software engineering systems. However, existing evaluation methodologies remain largely centered on static, isolated, and short-horizon benchmarks that fail to capture the dynamic complexity of real-world production workflows. As a result, benchmark performance may poorly reflect practical capability under realistic runtime environments involving long execution chains, tool interactions, dependency management, and iterative feedback loops. We thus present RAMP, a production-grounded infrastructure for assessing long-horizon software engineering agents. Built upon the YatCC integrated platform, RAMP provides a unified runtime assessment architecture through standardized orchestration and execution interfaces. RAMP introduces realistic compiler-construction workloads with serial dependencies and complex toolchain interactions, together with a staged recovery mechanism for analyzing execution behavior under partial workflow failure. The framework further incorporates utility-oriented multi-dimensional metrics that jointly evaluate outcome quality and process efficiency. We conduct runtime assessments across 15 mainstream models and observe substantial capability degradation that remains largely invisible to conventional isolated benchmarks. Task completion rates progressively collapse across serial workflows, dropping from 100% in the initial stage to only 20% in the final stage, while none of the evaluated models successfully completes the entire pipeline. Runtime analysis reveals systematic failure propagation and significant resource inefficiencies, with computational costs differing by up to three orders of magnitude among comparable models. These findings suggest RAMP advances agentic model evaluation toward continuous, runtime-observable, and production-grounded assessment.

Online inference is becoming a key service product for many businesses, deployed in cloud platforms to meet customer demands. Despite their revenue-generation capability, these services need to operate under tight Quality-of-Service (QoS) and cost budget constraints. This paper introduces KAIROS, a novel runtime framework that maximizes the query throughput while meeting QoS target and a cost budget. KAIROS designs and implements novel techniques to build a pool of heterogeneous compute hardware without online exploration overhead, and distribute inference queries optimally at runtime. Our evaluation using industry-grade deep learning (DL) models shows that KAIROS yields up to 2X the throughput of an optimal homogeneous solution, and outperforms state-of-the-art schemes by up to 70%, despite advantageous implementations of the competing schemes to ignore their exploration overhead.

It is now a common business practice to buy access to large language model (LLM) inference rather than self-host, because of significant upfront hardware infrastructure and energy costs. However, as a buyer, there is no mechanism to verify the authenticity of the advertised service including the serving hardware platform, e.g. that it is actually being served using an NVIDIA H100. Furthermore, there are reports suggesting that model providers may deliver models that differ slightly from the advertised ones, often to make them run on less expensive hardware. That way, a client pays premium for a capable model access on more expensive hardware, yet ends up being served by a (potentially less capable) cheaper model on cheaper hardware. In this paper we introduce \textbf{hardware and software platform inference (HSPI)} -- a method for identifying the underlying architecture and software stack of a (black-box) machine learning model solely based on its input-output behavior. Our method leverages the inherent differences of various architectures and compilers to distinguish between different types and software stacks. By analyzing the numerical patterns in the model's outputs, we propose a classification framework capable of accurately identifying the used for model inference as well as the underlying software configuration. Our findings demonstrate the feasibility of inferring type from black-box models. We evaluate HSPI against models served on different real hardware and find that in a white-box setting we can distinguish between different s with between 83.9% and 100% accuracy. Even in a black-box setting we are able to achieve results that are up to three times higher than random guess accuracy.

Large language models have transformed code generation, enabling unprecedented automation in software development. As mobile ecosystems evolve, HarmonyOS has emerged as a critical platform requiring robust development tools. Software development for the HarmonyOS ecosystem relies heavily on ArkTS, a statically typed extension of TypeScript. Despite its growing importance, the ecosystem lacks robust tools for automated code repair, primarily due to the absence of a high-quality benchmark for evaluation. To address this gap, we present ArkEval, a unified framework for ArkTS automated repair workflow evaluation and benchmark construction. It provides the first comprehensive benchmark specifically designed for ArkTS automated program repair. We constructed this benchmark by mining issues from a large-scale official Huawei repository containing over 400 independent ArkTS applications. Through a rigorous multi-stage filtering process, we curated 502 reproducible issues. To ensure testability, we employed a novel LLM-based test generation and voting mechanism involving Claude and other models. Furthermore, we standardized problem statements to facilitate fair evaluation. Finally, we evaluated four state-of-the-art Large Language Models (LLMs) on our benchmark using a retrieval-augmented repair workflow. Our results highlight the current capabilities and limitations of LLMs in repairing ArkTS code, paving the way for future research in this low-resource language domain.

The development of autonomous agents increasingly relies on Multimodal Language Models (MLMs) to perform tasks described in natural language with GUI environments, such as websites, desktop computers, or mobile phones. Existing benchmarks for MLM agents in interactive environments are limited by their focus on a single environment, lack of detailed and generalized evaluation methods, and the complexities of constructing tasks and evaluators. To overcome these limitations, we introduce Crab, the first agent benchmark framework designed to support cross-environment tasks, incorporating a graph-based fine-grained evaluation method and an efficient mechanism for task and evaluator construction. Our framework supports multiple devices and can be easily extended to any environment with a Python interface. Leveraging Crab, we developed a cross-platform Crab Benchmark-v0 comprising 100 tasks in computer desktop and mobile phone environments. We evaluated four advanced MLMs using different single and multi-agent system configurations on this benchmark. The experimental results demonstrate that the single agent with GPT-4o achieves the best completion ratio of 35.26%. All framework code, agent code, and task datasets are publicly available at https://github.com/camel-ai/crab.

With advances in decision-making and reasoning capabilities, multimodal agents show strong potential in computer application scenarios. Past evaluations have mainly assessed GUI interaction skills, while tool invocation abilities, such as those enabled by the Model Context Protocol (MCP), have been largely overlooked. Comparing agents with integrated tool invocation to those evaluated only on GUI interaction is inherently unfair. We present OSWorld-MCP, the first comprehensive and fair benchmark for assessing computer-use agents' tool invocation, GUI operation, and decision-making abilities in a real-world environment. We design a novel automated code-generation pipeline to create tools and combine them with a curated selection from existing tools. Rigorous manual validation yields 158 high-quality tools (covering 7 common applications), each verified for correct functionality, practical applicability, and versatility. Extensive evaluations of state-of-the-art multimodal agents on OSWorld-MCP show that MCP tools generally improve task success rates (e.g., from 8.3% to 20.4% for OpenAI o3 at 15 steps, from 40.1% to 43.3% for Claude 4 Sonnet at 50 steps), underscoring the importance of assessing tool invocation capabilities. However, even the strongest models have relatively low tool invocation rates, Only 36.3%, indicating room for improvement and highlighting the benchmark's challenge. By explicitly measuring MCP tool usage skills, OSWorld-MCP deepens understanding of multimodal agents and sets a new standard for evaluating performance in complex, tool-assisted environments. Our code, environment, and data are publicly available at https://osworld-mcp.github.io.

With the advancements in hardware, software, and large language model technologies, the interaction between humans and operating systems has evolved from the command-line interface to the rapidly emerging AI agent interactions. Building an operating system (OS) agent capable of executing user instructions and faithfully following user desires is becoming a reality. In this technical report, we present ColorAgent, an OS agent designed to engage in long-horizon, robust interactions with the environment while also enabling personalized and proactive user interaction. To enable long-horizon interactions with the environment, we enhance the model's capabilities through step-wise reinforcement learning and self-evolving training, while also developing a tailored multi-agent framework that ensures generality, consistency, and robustness. In terms of user interaction, we explore personalized user intent recognition and proactive engagement, positioning the OS agent not merely as an automation tool but as a warm, collaborative partner. We evaluate ColorAgent on the AndroidWorld and AndroidLab benchmarks, achieving success rates of 77.2% and 50.7%, respectively, establishing a new state of the art. Nonetheless, we note that current benchmarks are insufficient for a comprehensive evaluation of OS agents and propose further exploring directions in future work, particularly in the areas of evaluation paradigms, agent collaboration, and security. Our code is available at https://github.com/MadeAgents/mobile-use.

Large language models (LLMs) power many state-of-the-art systems in natural language processing. However, these models are extremely computationally expensive, even at inference time, raising the natural question: when is the extra cost of deploying a larger model worth the anticipated boost in capabilities? Better understanding this tradeoff fundamentally could benefit from an inference efficiency metric that is both (i) easily comparable across models from different providers, and (ii) representative of the true cost of running queries in an isolated performance environment. Unfortunately, access to LLMs today is largely restricted to black-box text generation APIs and raw runtimes measured through this interface do not satisfy these desiderata: model providers can apply various software and hardware optimizations orthogonal to the model, and models served on shared infrastructure are susceptible to performance contention. To circumvent these problems, we propose a new metric for comparing inference efficiency across models. This metric puts models on equal footing as though they were served (i) on uniform hardware and software, and (ii) without performance contention. We call this metric the idealized runtime, and we propose a methodology to efficiently estimate this metric for autoregressive Transformer models. We also propose cost-aware variants that incorporate the number of accelerators needed to serve the model. Using these metrics, we compare ten state-of-the-art LLMs to provide the first analysis of inference efficiency-capability tradeoffs; we make several observations from this analysis, including the fact that the superior inference runtime performance of certain APIs is often a byproduct of optimizations within the API rather than the underlying model. Our methodology also facilitates the efficient comparison of different software and hardware stacks.

Large language models (LLMs) and large multimodal models (LMMs) have shown great potential in automating complex tasks like web browsing and gaming. However, their ability to generalize across diverse applications remains limited, hindering broader utility. To address this challenge, we present OSCAR: Operating System Control via state-Aware reasoning and Re-planning. OSCAR is a generalist agent designed to autonomously navigate and interact with various desktop and mobile applications through standardized controls, such as mouse and keyboard inputs, while processing screen images to fulfill user commands. OSCAR translates human instructions into executable Python code, enabling precise control over graphical user interfaces (GUIs). To enhance stability and adaptability, OSCAR operates as a state machine, equipped with error-handling mechanisms and dynamic task re-planning, allowing it to efficiently adjust to real-time feedback and exceptions. We demonstrate OSCAR's effectiveness through extensive experiments on diverse benchmarks across desktop and mobile platforms, where it transforms complex workflows into simple natural language commands, significantly boosting user productivity. Our code will be open-source upon publication.

Large Language Models (LLMs) present a critical trade-off between inference quality and computational cost: larger models offer superior capabilities but incur significant latency, while smaller models are faster but less powerful. Existing serving strategies often employ fixed model scales or static two-stage speculative decoding, failing to dynamically adapt to the varying complexities of user requests or fluctuations in system performance. This paper introduces , a novel framework that reimagines LLM inference as an adaptive routing problem solved through multi-level speculative decoding. dynamically constructs and optimizes inference "paths" (chains of models) based on real-time feedback, addressing the limitations of static approaches. Our contributions are threefold: (1) An adaptive model chain scheduling mechanism that leverages performance profiling (execution times) and predictive similarity metrics (derived from token distribution divergence) to continuously select the optimal sequence of draft and verifier models, minimizing predicted latency per generated token. (2) A multi-level collaborative verification framework where intermediate models within the selected chain can validate speculative tokens, reducing the verification burden on the final, most powerful target model. (3) A synchronized state management system providing efficient, consistent KV cache handling across heterogeneous models in the chain, including precise, low-overhead rollbacks tailored for asynchronous batch processing inherent in multi-level speculation. Preliminary experiments demonstrate the validity of our method.

Semantic audio applications increasingly require controllable generation on commodity and embedded hardware rather than through framework-heavy datacenter stacks. We present aria, a dependency-free native runtime that runs the complete text-to-music pipeline of Stable Audio~3 (SA3) on ordinary GPUs, CPU-only machines, and a Raspberry~Pi~5, with no Python or deep-learning framework underneath. Our main contribution is a study of quantization: running the model at lower numerical precision to fit tight memory budgets, saving memory in place rather than adding to it. Because the runtime owns every internal tensor, it also exposes activation steering, a low-cost way to steer what the model generates. We judge the quality cost with three independent measures of the output (prompt adherence, overall audio quality, taste preservation), each compared against the ordinary variation between random seeds. Eight-bit precision shows no measurable quality loss on any measure while sharply cutting memory, and it is the fastest mode on the GPU; four-bit adds a small, bounded cost but shrinks the footprint enough to run the 1.2-billion-parameter model on an 8\,GB Pi. Against the official implementation, aria matches or exceeds generation speed and starts about seven times faster. A case study of the steering interface generates music carrying taste associations (sonic seasoning), with genuine but bounded control for a subset of attributes. These results make a compact, quantized runtime with built-in control a practical basis for on-device semantic audio in Internet-of-Sounds settings. The aria runtime is released at https://github.com/matteospanio/aria.

Serving numerous users and requests concurrently requires good fairness in Large Language Models (LLMs) serving system. This ensures that, at the same cost, the system can meet the Service Level Objectives (SLOs) of more users , such as time to first token (TTFT) and time between tokens (TBT), rather than allowing a few users to experience performance far exceeding the SLOs. To achieve better fairness, the preemption-based scheduling policy dynamically adjusts the priority of each request to maintain balance during runtime. However, existing systems tend to overly prioritize throughput, overlooking the overhead caused by preemption-induced context switching, which is crucial for maintaining fairness through priority adjustments. In this work, we identify three main challenges that result in this overhead. 1) Inadequate I/O utilization. 2) GPU idleness. 3) Unnecessary I/O transmission during multi-turn conversations. Our key insight is that the block-based KV cache memory policy in existing systems, while achieving near-zero memory waste, leads to discontinuity and insufficient granularity in the KV cache memory. To respond, we introduce FastSwitch, a fairness-aware serving system that not only aligns with existing KV cache memory allocation policy but also mitigates context switching overhead. Our evaluation shows that FastSwitch outperforms the state-of-the-art LLM serving system vLLM with speedups of 1.4-11.2x across different tail TTFT and TBT.

The emergence of Software-Defined Vehicles represents a fundamental shift in automotive design, prioritizing software-centric architectures over traditional hardware-driven models. SDVs require modularity, interoperability, real-time processing, and over-the-air update capabilities throughout the vehicle lifecycle. However, current vehicle systems, characterized by tightly coupled software and hardware, struggle to meet these demands due to their complexity and heterogeneity. A critical first step toward enabling SDVs is the decoupling of software from hardware, which can be facilitated through a robust Hardware Abstraction Layer. While existing HALs offer hardware independence and standardized interfaces, their applicability and effectiveness in SDV contexts remain uncertain. This paper systematically evaluates current automotive HALs and explores HAL mechanisms from non-automotive domains, including smartphones, networking, and industrial automation, to extract cross-domain insights relevant to SDV development. A criteria-driven evaluation framework is developed to assess HALs against SDV-specific needs. Findings reveal that while middleware-based HALs offer portability and modularity, hypervisor-based approaches better support safety, OTA readiness, and hardware efficiency. Limitations in both approaches are identified, prompting recommendations for a hybrid HAL design that integrates hypervisor isolation with middleware standardization. This paper contributes to the ongoing developments in automotive software architecture by offering insights into the applicability and effectiveness of current HAL strategies. It provides actionable guidance for designing flexible, scalable, and future-ready HALs to support SDVs across their lifecycle.

Personalized large language models (LLMs) tailor content to individual preferences using user profiles or histories. However, existing parameter-efficient fine-tuning (PEFT) methods, such as the ``One-PEFT-Per-User'' (OPPU) paradigm, require training a separate adapter for each user, making them computationally expensive and impractical for real-time updates. We introduce Profile-to-PEFT, a scalable framework that employs a hypernetwork, trained end-to-end, to map a user's encoded profile directly to a full set of adapter parameters (e.g., LoRA), eliminating per-user training at deployment. This design enables instant adaptation, generalization to unseen users, and privacy-preserving local deployment. Experimental results demonstrate that our method outperforms both prompt-based personalization and OPPU while using substantially fewer computational resources at deployment. The framework exhibits strong generalization to out-of-distribution users and maintains robustness across varying user activity levels and different embedding backbones. The proposed Profile-to-PEFT framework enables efficient, scalable, and adaptive LLM personalization suitable for large-scale applications.

Serving Large Language Models (LLMs) is a GPU-intensive task where traditional autoscalers fall short, particularly for modern Prefill-Decode (P/D) disaggregated architectures. This architectural shift, while powerful, introduces significant operational challenges, including inefficient use of heterogeneous hardware, network bottlenecks, and critical imbalances between prefill and decode stages. We introduce HeteroScale, a coordinated autoscaling framework that addresses the core challenges of P/D disaggregated serving. HeteroScale combines a topology-aware scheduler that adapts to heterogeneous hardware and network constraints with a novel metric-driven policy derived from the first large-scale empirical study of autoscaling signals in production. By leveraging a single, robust metric to jointly scale prefill and decode pools, HeteroScale maintains architectural balance while ensuring efficient, adaptive resource management. Deployed in a massive production environment on tens of thousands of GPUs, HeteroScale has proven its effectiveness, increasing average GPU utilization by a significant 26.6 percentage points and saving hundreds of thousands of GPU-hours daily, all while upholding stringent service level objectives.

Since the introduction of the Model Context Protocol (MCP), the number of available tools for Large Language Models (LLMs) has increased significantly. These task-specific tool sets offer an alternative to general-purpose tools such as web browsers, while being easier to develop and maintain than GUIs. However, current general-purpose agents predominantly rely on web browsers for interacting with the environment. Here, we introduce TheMCPCompany, a benchmark for evaluating tool-calling agents on tasks that involve interacting with various real-world services. We use the REST APIs of these services to create MCP servers, which include over 18,000 tools. We also provide manually annotated ground-truth tools for each task. In our experiments, we use the ground truth tools to show the potential of tool-calling agents for both improving performance and reducing costs assuming perfect tool retrieval. Next, we explore agent performance using tool retrieval to study the real-world practicality of tool-based agents. While all models with tool retrieval perform similarly or better than browser-based agents, smaller models cannot take full advantage of the available tools through retrieval. On the other hand, GPT-5's performance with tool retrieval is very close to its performance with ground-truth tools. Overall, our work shows that the most advanced reasoning models are effective at discovering tools in simpler environments, but seriously struggle with navigating complex enterprise environments. TheMCPCompany reveals that navigating tens of thousands of tools and combining them in non-trivial ways to solve complex problems is still a challenging task for current models and requires both better reasoning and better retrieval models.

Large Language Models (LLMs) deployed on mobile devices offer benefits like user privacy and reduced network latency, but introduce a significant security risk: the leakage of proprietary models to end users. To mitigate this risk, we propose a system design for protecting on-device LLMs using Arm Trusted Execution Environment (TEE), TrustZone. Our system addresses two primary challenges: (1) The dilemma between memory efficiency and fast inference (caching model parameters within TEE memory). (2) The lack of efficient and secure Neural Processing Unit (NPU) time-sharing between Rich Execution Environment (REE) and TEE. Our approach incorporates two key innovations. First, we employ pipelined restoration, leveraging the deterministic memory access patterns of LLM inference to prefetch parameters on demand, hiding memory allocation, I/O and decryption latency under computation time. Second, we introduce a co-driver design, creating a minimal data plane NPU driver in the TEE that collaborates with the full-fledged REE driver. This reduces the TEE TCB size and eliminates control plane reinitialization overhead during NPU world switches. We implemented our system on the emerging OpenHarmony OS and the llama.cpp inference framework, and evaluated it with various LLMs on an Arm Rockchip device. Compared to a strawman TEE baseline lacking our optimizations, our system reduces TTFT by up to 90.9% and increases decoding speed by up to 23.2%.

GPU architectures have continued to grow in complexity, with recent incarnations introducing increasingly powerful fixed-function units for matrix multiplication and data movement to accompany highly parallel general-purpose cores. To fully leverage these machines, software must use sophisticated schedules that maximally utilize all hardware resources. Since realizing such schedules is complex, both programmers and compilers routinely employ program transformations, such as software pipelining (SWP) and warp specialization (WS), to do so in practice. However, determining how best to use SWP and WS in combination is a challenging problem that is currently handled through a mix of brittle compilation heuristics and fallible human intuition, with little insight into the space of solutions. To remedy this situation, we introduce a novel formulation of SWP and WS as a joint optimization problem that can be solved holistically by off-the-shelf constraint solvers. We reify our approach in Twill, the first system that automatically derives optimal SWP and WS schedules for a large class of iterative programs. Twill is heuristic-free, easily extensible to new GPU architectures, and guaranteed to produce optimal schedules. We show that Twill can rediscover, and thereby prove optimal, the SWP and WS schedules manually developed by experts for Flash Attention on both the NVIDIA Hopper and Blackwell GPU architectures.

Large Language Models (LLMs) have shown promise in various tasks, yet few benchmarks assess their capabilities in embedded system development.In this paper, we introduce EmbedAgent, a paradigm designed to simulate real-world roles in embedded system development, such as Embedded System Programmer, Architect, and Integrator. This paradigm enables LLMs to be tested in tasks that bridge the gap between digital and physical systems, allowing for a more comprehensive assessment of their capabilities. To evaluate LLMs on these tasks, we propose Embedbench, the first comprehensive benchmark for embedded system programming, circuit design, and cross-platform migration.Embedbench consists of 126 cases, covering 9 electronic components across 3 hardware platforms. Through extensive experiments on 10 mainstream LLMs, we uncover several key findings. Surprisingly, despite the simplicity of the cases, DeepSeek-R1 achieves only a 55.6% pass@1 rate when provided with schematic information, and 50.0% when tasked with generating the schematics itself. In the cross-platform migration tasks, LLMs show relatively strong performance with MicroPython on the Raspberry Pi Pico (with the top model achieving 73.8% pass@1), but perform poorly on ESP-IDF, where the best model reaches only 29.4% pass@1.Interestingly, we observe that general-purpose chat LLMs like DeepSeek-V3 often fail to utilize relevant pre-trained knowledge in this domain, while reasoning LLMs tend to overthink and overlook efficient knowledge during pretraining. Based on these insights, we propose two strategies: retrieval augmented generation and compiler feedback-to enhance LLM performance. These strategies result in significant improvements, with Deepseek-R1 reaching a 65.1% pass@1 with correct schematics, and 53.1% without. Additionally, the accuracy of the Arduino to ESP32 migration task improves from 21.4% to 27.8%.

Modern applications increasingly rely on inference serving systems to provide low-latency insights with a diverse set of machine learning models. Existing systems often utilize resource elasticity to scale with demand. However, many applications cannot rely on hardware scaling when deployed at the edge or other resource-constrained environments. In this work, we propose a model selection and scheduling algorithm that implements accuracy scaling to increase efficiency for these more constrained deployments. We show that existing schedulers that make decisions using profiled model accuracy are biased toward the label distribution present in the test dataset. To address this problem, we propose using ML models -- which we call SneakPeek models -- to dynamically adjust estimates of model accuracy, based on the underlying data. Furthermore, we greedily incorporate inference batching into scheduling decisions to improve throughput and avoid the overhead of swapping models in and out of GPU memory. Our approach employs a new notion of request priority, which navigates the trade-off between attaining high accuracy and satisfying deadlines. Using data and models from three real-world applications, we show that our proposed approaches result in higher-utility schedules and higher accuracy inferences in these hardware-constrained environments.

Recent years have witnessed a rapid development of mobile GUI agents powered by large language models (LLMs), which can autonomously execute diverse device-control tasks based on natural language instructions. The increasing accuracy of these agents on standard benchmarks has raised expectations for large-scale real-world deployment, and there are already several commercial agents released and used by early adopters. However, are we really ready for GUI agents integrated into our daily devices as system building blocks? We argue that an important pre-deployment validation is missing to examine whether the agents can maintain their performance under real-world threats. Specifically, unlike existing common benchmarks that are based on simple static app contents (they have to do so to ensure environment consistency between different tests), real-world apps are filled with contents from untrustworthy third parties, such as advertisement emails, user-generated posts and medias, etc. ... To this end, we introduce a scalable app content instrumentation framework to enable flexible and targeted content modifications within existing applications. Leveraging this framework, we create a test suite comprising both a dynamic task execution environment and a static dataset of challenging GUI states. The dynamic environment encompasses 122 reproducible tasks, and the static dataset consists of over 3,000 scenarios constructed from commercial apps. We perform experiments on both open-source and commercial GUI agents. Our findings reveal that all examined agents can be significantly degraded due to third-party contents, with an average misleading rate of 42.0% and 36.1% in dynamic and static environments respectively. The framework and benchmark has been released at https://agenthazard.github.io.

We present Federation of Agents (FoA), a distributed orchestration framework that transforms static multi-agent coordination into dynamic, capability-driven collaboration. FoA introduces Versioned Capability Vectors (VCVs): machine-readable profiles that make agent capabilities searchable through semantic embeddings, enabling agents to advertise their capabilities, cost, and limitations. Our aarchitecturecombines three key innovations: (1) semantic routing that matches tasks to agents over sharded HNSW indices while enforcing operational constraints through cost-biased optimization, (2) dynamic task decomposition where compatible agents collaboratively break down complex tasks into DAGs of subtasks through consensus-based merging, and (3) smart clustering that groups agents working on similar subtasks into collaborative channels for k-round refinement before synthesis. Built on top of MQTT,s publish-subscribe semantics for scalable message passing, FoA achieves sub-linear complexity through hierarchical capability matching and efficient index maintenance. Evaluation on HealthBench shows 13x improvements over single-model baselines, with clustering-enhanced laboration particularly effective for complex reasoning tasks requiring multiple perspectives. The system scales horizontally while maintaining consistent performance, demonstrating that semantic orchestration with structured collaboration can unlock the collective intelligence of heterogeneous federations of AI agents.